Question I don't know where my Front fans plug in.

Hyperdarkness

Prominent
Mar 20, 2019
38
0
530
I'm pretty new to PC building so I could be making an very easy mistake, but in my Coolermaster mastercase h500p mesh It has 2 big fans on the front. They have only one cord on each that connect to a spliter then it brakes off into 2 different cords, one goes into an rgb remote to control the rgb but the other I'm guessing powers the fans but I can't for the life of me figure out where it goes. My motherboard is the Prime z370-A ll and I have checked the manuel and can't seem to find where it goes. I can add photos and answer any questions if need. Any help would be greatly appreciated.
 
Post a photo of the end of the cable? It will either plug into a hub (That itself is plugged into the motherboard) or the motherboard, OR, if they are cheap, not controllable fans, then they might plug into a large four pin molex power connector straight off the power supply. Hopefully that is not the case, because if so you will be stuck with full power fans at all times.

Usually, if fans have RGB then they will plug directly into one of the three or four pin cha_fan or sys_fan headers on the motherboard.
 
Post a photo of the end of the cable? It will either plug into a hub (That itself is plugged into the motherboard) or the motherboard, OR, if they are cheap, not controllable fans, then they might plug into a large four pin molex power connector straight off the power supply. Hopefully that is not the case, because if so you will be stuck with full power fans at all times.

Usually, if fans have RGB then they will plug directly into one of the three or four pin cha_fan or sys_fan headers on the motherboard.
I'm not sure how to post a picture from my camera role, the only thing I can find is that I would have to put a URL in.
 
That is the male connector splitting the fans you can connect a fan to that connector but the end cable should be a 3 or 4 pin female connector that plugs into the system fan outputs in the motherboard. I looked at a picture of your motherboard and I think your fan outputs should be here.
 
Last edited: