- Jun 6, 2020
- 35
- 0
- 30
I dont know if this is the right place to post this. If not, please let me know
So, I bought a used graphics card on eBay (gtx 1650s) and after installing it (used DDU, latest drivers) everything worked fine, I even stressed it for half an hour and didn't pass 62 celsius. The problem is that the next morning and everytime since then, I only get video output after second boot (turn on, no output, turn off, turn on, output). I had a gtx 970 before this and everything worked fine. I installed an rx 570 in between these two cards, but I didn't have any issue either and I "DDU'd" it. Also, when I had the gtx 970 I overclocked the rams (didn't change voltage or timings, tested stability the hole night) if it might be important. I saw a guy who fixed a similar problem by disabling Windows fast boot, but didn't work in my case.
Any ideas?
My PC specs are:
Ryzen 5 2600
EVGA GTX 1650 SUPER SC Ultra
Gigabyte B450M DSH3
HyperX Fury 2x4GB 2666 (OC@3200 1.2V)
SK Hynix NVME bootdrive
EVGA 600W PSU
So, I bought a used graphics card on eBay (gtx 1650s) and after installing it (used DDU, latest drivers) everything worked fine, I even stressed it for half an hour and didn't pass 62 celsius. The problem is that the next morning and everytime since then, I only get video output after second boot (turn on, no output, turn off, turn on, output). I had a gtx 970 before this and everything worked fine. I installed an rx 570 in between these two cards, but I didn't have any issue either and I "DDU'd" it. Also, when I had the gtx 970 I overclocked the rams (didn't change voltage or timings, tested stability the hole night) if it might be important. I saw a guy who fixed a similar problem by disabling Windows fast boot, but didn't work in my case.
Any ideas?
My PC specs are:
Ryzen 5 2600
EVGA GTX 1650 SUPER SC Ultra
Gigabyte B450M DSH3
HyperX Fury 2x4GB 2666 (OC@3200 1.2V)
SK Hynix NVME bootdrive
EVGA 600W PSU
Facebook
Twitter
Instagram