I have 2 250GB SSD's & 2 WD Black 2.5 HDD's in Raid10 how can I make the 2 SSD's Primary and the 2 WD 2.5.s mirror so I have S

[crazykaraoke]

2 Kingston HyperX SSD's & 2 2.5 WD Black HDD's in Raid10 With SSD's as primary & WD as mirror as it's transparent. How can I do this without it automatically selecting. Or can I raid0 both sets and mirror one to the other set?

 

[popatim]

You raid0 the drives first, then create the mirror.
This might not be such a good idea but go ahead and try it and see what performance you get from it.