[SOLVED] I have 2x8GB 16GB DIMM DDR3 1333 MHz and add 3200MHz?

[Marplot]

I have four slots in my Asus Sabertooth 990fx R.2 mobo with two 16GB DIMM DDR3 1333 MHz and add 3200MHz additional memory? Or Must I should remove the 1333Mhz?

 

[Amddefector]

I have four slots in my Asus Sabertooth 990fx R.2 mobo with two 16GB DIMM DDR3 1333 MHz and add 3200MHz additional memory? Or Must I should remove the 1333Mhz?

Remove the slower memory otherwise it will all run a 1333 if it runs at all.

 

[sizzling]

DDR3 as far as I know goes up to 2400mhz. If you have RAM rated at 3200mhz I expect it’s DDR4 which will not fit.

Mixing RAM is always a gamble, might work, might not. If it does work the best you should hope for is running at the speed of the slowest RAM. All RAM in a system must run at the same speed.

 

[Nighthawk117]

I have four slots in my Asus Sabertooth 990fx R.2 mobo with two 16GB DIMM DDR3 1333 MHz and add 3200MHz additional memory? Or Must I should remove the 1333Mhz?

3200Mhz will be DDR4 not DDR3, no you can't mix them and your board doesn't support DDR4 anyway.