Question I have a Startech Fiber NIC that wont pull an image from SCCM in legacy or secure boot.

Feb 10, 2020
1
0
10
0
I'm trying to pull a new image from SCCM using StarTech PEX1000MMSC2. I can use a media converter to image the machine fine utilizing the on board copper port, but when I slide the Fiber NIC into the PCIe slot....It isn't recognized by bios if secure boot is enabled. If i try to use legacy settings, the NIC is detected but unable to receive reply from SCCM.
 

ASK THE COMMUNITY

TRENDING THREADS