I installed new ram and my pc won't turn on

[alexsss1234]

I have an Asrock FSB 1333 retail MB and I installed new rams on it 2x8gb and after that the pc won't even turn on. Can anyone help me?

 

[MrGruffles]

Do you get a beep sequence when you try to boot? Try using one stick at a time, one may be DOA. Did you check the MB list of compatible memory?

 

[alexsss1234]

No I mean it doesn't do nothing at all I bought the rams few hours ago and I closed the pc properly removed the rams installed the new ones and the pc did nothing after that.

 

[johnnyb105]

Did it even turn on did you unplug and ground yourself before opening the case maybe use a static strap to insure you didn't damage anything are the ram sticks seated properly ?

 

[alexsss1234]

I have switched rams before many times and always make the that I get the rams right inside

 

[johnnyb105]

ok have you unplug your system and plug it back in do you get any power what so ever to the system fans ect spin?

 

[alexsss1234]

What i have done so far is removing and installing the cpu back removed and cables that are in and plugged them again and generally nothing

 

[alexsss1234]

So I found that my Power supply does a little noise when its plugged. Barely can hear it.

 

[MrGruffles]

Try one stick at a time. Remove one, try to boot. If nothing, then shut down, remove power, take the one out and put in the other stick. plug it all back in and try to boot. If still nothing, there is a slim chance that they are both DOA. Or those sticks just aren't compatible with your Motherboard.