Question I installed new RAM but no display

[KrystalBeast]

So I just got 2x4gb Royemai DDR3 RAM sticks for my hp 1495 motherboard but I get no display, I can get pass the 1 short beep problem, but still no display, currently I’m trying the cmos battery method (the battery is out) and I’m wandering what other factors r in play that idk of

 

[Bob.B]

So I just got 2x4gb Royemai DDR3 RAM sticks for my hp 1495 motherboard but I get no display, I can get pass the 1 short beep problem, but still no display, currently I’m trying the cmos battery method (the battery is out) and I’m wandering what other factors r in play that idk of

What happens if you try the sticks one at a time in each slot?

 

[KrystalBeast]

Same results, I almost got scared that I couldn’t use the original 2x2gb RAM sticks from hp

 

[KrystalBeast]

Luckily I got the old ram sticks to work just fine

 

[Bob.B]

Same results, I almost got scared that I couldn’t use the original 2x2gb RAM sticks from hp

Perhaps check with hp to see if there is any bios updates.

 

[KrystalBeast]

Ight well I was able to download the 2.33 version for my stuff, and I had it working, but then the display cut out and is doing the same thing

 

[Bob.B]

Ight well I was able to download the 2.33 version for my stuff, and I had it working, but then the display cut out and is doing the same thing

What is this machine?

 

[KrystalBeast]

Well the original pc itself (factory made) is a HP 8200 elite desktop pc
Specs:
-HP 1495 motherboard w/ integrated Intel graphics
- Intel core i5 vpro cpu
-the OP was originally Windos 7 but i was able to get into Windows 10
-240w PSU
-500gb internal storage
-2x4gb DDR3 RAM cards PC3-10600U-9-11-A1

Upgrades added:
-Nvidia GT 1030 GPU

 

[Bob.B]

Well the original pc itself (factory made) is a HP 8200 elite desktop pc
Specs:
-HP 1495 motherboard w/ integrated Intel graphics
- Intel core i5 vpro cpu
-the OP was originally Windos 7 but i was able to get into Windows 10
-240w PSU
-500gb internal storage
-2x4gb DDR3 RAM cards PC3-10600U-9-11-A1

Upgrades added:
-Nvidia GT 1030 GPU

Now that you have updated the bios try it one ram stick at a time and see if it makes a diff.

 

[KrystalBeast]

Hopefully it will work with the new sticks, because as of this moment right now with me typing this I am having a hard time getting the original 2 GB cards to work

 

[KrystalBeast]

Welp, The PC doesn’t give me the one beep memory error, but still no display it with 1 ram card

 

[KrystalBeast]

OK so I finally got the PC to boot up with one of the new random access memory cards I got which has 4 GB on one card, the method I’m doing I’m removing the motherboard battery and I am also taking out my GPU and I’m going to install the Random Access Memories cards to get that functional before I put it back in my GPU cause I think what’s going on is that the PC works once it gets past that battery removal reset but then it won’t display Because maybe the graphics unit just doesn’t recognize it so I’m installing both of the ram and then I’m going to reinstall the GPU

 

[KrystalBeast]

UPDATE: I got my pc to run with both new RAM cards but now I can’t get my GPU to display, I even uninstalled the IGPU including drivers for it, and I’ve removed the CMOS battery for 5 mins and put it back, still nothing but the fan on the gpu is running