i just built my first computer but theres no video

[ayaseysish]

I just built my first computer "low end" (the boson) from austin evans , once i started it up i found out the apu fan was running but when i shut it down it started up but it stops in 4 seconds once i turn it on , is this problem from the motherboard? or did i do something wrong with the wiring? i really was hyped up but i can't really seem to find the problem.. im going to drop some pictures in here
http://prntscr.com/5ps3kq
http://prntscr.com/5ps3uh

 

[dgothi]

Hard to tell. Try clear cmos on motherboard. see what happen?

 

[ayaseysish]

Hard to tell. Try clear cmos on motherboard. see what happen?

went ahead and did , this time the apu's fan lasted for about 5 seconds more but it shut itself down once again
also i just checked how many volts the battery has and its 3 the exact same amount it says , i myself think its a problem with the motherboard , im not entirely sure tho

 

[Larry_The_Great]

Try taking the cpu out and have a look at the pins inside the motherboard socket where the cpu sits. You may have a bent pin like this

https://www.google.com.au/search?q=bent+cpu+socket+pins&espv=2&biw=1920&bih=955&source=lnms&tbm=isch&sa=X&ei=ZOmtVO-ACIf88QXLuYHwAg&ved=0CAYQ_AUoAQ#imgdii=_&imgrc=hUmN4tuTN0vlcM%253A%3BA3pOjoHhiNtFzM%3Bhttp%253A%252F%252Fforumscdn.tweaktown.com%252Fattachments%252Fgigabyte%252F5916d1371796682-x58a-ud3r-bent-cpu-pins-cpu-socket-bent-pins-example-crop_75-.jpg%3Bhttp%253A%252F%252Fforums.tweaktown.com%252Fgigabyte%252F53206-x58a-ud3r-bent-cpu-pins.html%3B756%3B623

If you do you can watch a youtube video on how to fix it or just contact your motherboard supplier if its a new board

 

[ayaseysish]

Try taking the cpu out and have a look at the pins inside the motherboard socket where the cpu sits. You may have a bent pin like this

https://www.google.com.au/search?q=bent+cpu+socket+pins&espv=2&biw=1920&bih=955&source=lnms&tbm=isch&sa=X&ei=ZOmtVO-ACIf88QXLuYHwAg&ved=0CAYQ_AUoAQ#imgdii=_&imgrc=hUmN4tuTN0vlcM%253A%3BA3pOjoHhiNtFzM%3Bhttp%253A%252F%252Fforumscdn.tweaktown.com%252Fattachments%252Fgigabyte%252F5916d1371796682-x58a-ud3r-bent-cpu-pins-cpu-socket-bent-pins-example-crop_75-.jpg%3Bhttp%253A%252F%252Fforums.tweaktown.com%252Fgigabyte%252F53206-x58a-ud3r-bent-cpu-pins.html%3B756%3B623

If you do you can watch a youtube video on how to fix it or just contact your motherboard supplier if its a new board

its not bent

i also checked all of the fans in the case and they all see to be working just fine the only fan that seems to not be working its the cpu's one

 

[ayaseysish]

tried using vga and 3 different hdmi cables with a different monitor , still no display

 

[Larry_The_Great]

Does the computer actually stay on or is it just the display that turns off. Because the display should be the least of your worries try keeping the computer on first without any display connected.

 

[dgothi]

Hard to tell. Try clear cmos on motherboard. see what happen?

went ahead and did , this time the apu's fan lasted for about 5 seconds more but it shut itself down once again
also i just checked how many volts the battery has and its 3 the exact same amount it says , i myself think its a problem with the motherboard , im not entirely sure tho

It should NOT be difficult this way. APU motherboard is really easy to build PC and boot up quickly... I am not sure what is wrong with this issue. Forget it, Just exchange it for other motherboard if you can.

Make sure you have good Power supply 550 watts with 80 plus or better.

I am sorry I have no idea how to solution your current motherboard. Good luck.

 

[ayaseysish]

Does the computer actually stay on or is it just the display that turns off. Because the display should be the least of your worries try keeping the computer on first without any display connected.

the computer turns on and does not shut down , also would like to point out the first time i started it up i got a beep , i shut it down and turn it on again and heard it again so i checked the wiring and when i turned it back on again i didn't get the beep anymore. and its all working fine , every fan in the case is working except for the cpu's one