Question I keep getting BSOD and my PC sometimes doesn't open and remains in black screen.

[oAlp]

While I was using my PC I got BSOD and my PC automatically restarted. Now when I try to open it I get a BSOD and later get Black Screened or my PC starts normally and after a while I get BSOD. So far the BSOD messages were: Stop code: PFN_LIST_CORRUPT, Stop code: 0xc000021a, KERNEL_SECURITY_CHECK_FAILURE
My Specs:

• Ryzen 5 3600.
• Gigabyte GTX 1660 Super OC.
• Gigabyte B450M S2H.
• Corsair LPX 3000MHz 2x8GB RAM.
• Xioxia Exceria M.2 SSD.
• Corsair 650W Bronze

 

[scout_03]

test to made https://answers.microsoft.com/en-us...-corrupt/c06da122-42be-4c31-a879-3d3414b9ce91

 

[oAlp]

Whenever I try to do these I get BSOD trying to open the website or in the middle of the test

 

[oAlp]

It was fine yesterday, but today my PC suddenly froze and blue screened. Whenever I try to start my PC I get a blue screen, then the PC restarts but is pitch black and unresponsive. I shut it down and reopen it and the PC functions normally for a few minutes and blue screens again. This happened several times so far and I got several different types of errors.
Here are most of the blue screen messages:

https://imgur.com/a/65PAyDK

View: https://imgur.com/a/65PAyDK

My Specs:

1. Ryzen 5 3600.
2. Gigabyte GTX 1660 Super OC.
3. Gigabyte B450M S2H.
4. Corsair LPX 3000MHz 2x8GB RAM.
5. Xioxia Exceria M.2 SSD.
6. Corsair 650W Bronze

 

[Poppa-Smurf]

By chance are you running Corsair ICUE?

Corsair ICUE is also a driver datapool and will rewrite many of them to work with it. This program is notorious for this error specifically.

 

[Poppa-Smurf]

If you dump and reload all drivers excluding Corsair based from ICUE and use an alternate IT should be free of this.

I know of no other way to remove ICUE even surgically. It imbeds itself too deep to remove without a wipe.