I bought a Lenovo D30 motherboard on ebay for 160 dollars, and as the title states I need a case that will fit this motherboard. On the Lenovo site they say the board is E-ATX/SSI EEB based so I figure the mounting holes are the same, but the problem is that the board is about an inch wider, and a quarter inch longer (12.23″ x 14.01″)/(310.68mm x 355.9mm) to be exact.
The current parts I have are as follows
CPU: 2 x Intel Xeon E5-2670 v2
Coolers: 2 x Corsair H60
GPU: 2 x PowerColor Radeon R9 280X Crossfire
RAM: 16 x 4GB 1333 DDR3 RDIMM
ODD: LG 16x Bluray Writer
The current parts I have are as follows
CPU: 2 x Intel Xeon E5-2670 v2
Coolers: 2 x Corsair H60
GPU: 2 x PowerColor Radeon R9 280X Crossfire
RAM: 16 x 4GB 1333 DDR3 RDIMM
ODD: LG 16x Bluray Writer