Hello everybody, so I got a samsung 850 ssd, and i already have that plugged in and set up, but i also have a Seagate Barracuda 3TB 3.5" 7200RPM Internal Hard Drive but I'm missing two wires that I need. I have the sata cord but I need two more but don't know which ones they are, I have the sata cable but the Seagate Barracuda 3TB 3.5" 7200RPM Internal Hard Drive needs what it seems two more cables but don't know which ones they are. Thanks
-
AMD RDNA 4 GPUs will allegedly be rebranded RX 9000 — A mixture of new RDNA 3/RDNA 4 mobile GPUs and an RX 7000 refresh is expected to arrive at CES
I need another wire but don't know what it is.
- Thread starter Dylannn
- Start date
Solution
Hey there, Dylannn.
The HDD needs only 2 cables attached to it. One - coming from the motherboard's SATA port - data SATA cable and another one coming from the PSU which is a power SATA cable.
Check out the picture bellow:
The left picture is for an IDE drive (it uses an older interface and you can disregard it). What you need to look at, is the right picture.
Hope that helps.
Boogieman_WD
The HDD needs only 2 cables attached to it. One - coming from the motherboard's SATA port - data SATA cable and another one coming from the PSU which is a power SATA cable.
Check out the picture bellow:
The left picture is for an IDE drive (it uses an older interface and you can disregard it). What you need to look at, is the right picture.
Hope that helps.
Boogieman_WD
Boogieman_WD
Judicious
- Jul 31, 2014
- 6,047
- 2
- 35,960
Hey there, Dylannn.
The HDD needs only 2 cables attached to it. One - coming from the motherboard's SATA port - data SATA cable and another one coming from the PSU which is a power SATA cable.
Check out the picture bellow:
The left picture is for an IDE drive (it uses an older interface and you can disregard it). What you need to look at, is the right picture.
Hope that helps.
Boogieman_WD
The HDD needs only 2 cables attached to it. One - coming from the motherboard's SATA port - data SATA cable and another one coming from the PSU which is a power SATA cable.
Check out the picture bellow:
The left picture is for an IDE drive (it uses an older interface and you can disregard it). What you need to look at, is the right picture.
Hope that helps.
Boogieman_WD
Boogieman_WD :
Hey there, Dylannn.
The HDD needs only 2 cables attached to it. One - coming from the motherboard's SATA port - data SATA cable and another one coming from the PSU which is a power SATA cable.
Check out the picture bellow:
The left picture is for an IDE drive (it uses an older interface and you can disregard it). What you need to look at, is the right picture.
Hope that helps.
Boogieman_WD
The HDD needs only 2 cables attached to it. One - coming from the motherboard's SATA port - data SATA cable and another one coming from the PSU which is a power SATA cable.
Check out the picture bellow:
The left picture is for an IDE drive (it uses an older interface and you can disregard it). What you need to look at, is the right picture.
Hope that helps.
Boogieman_WD
What about those other things next to the cables, there are like little holes, do i just disregard those aswell?
Boogieman_WD
Judicious
- Jul 31, 2014
- 6,047
- 2
- 35,960
Just as BadAsAl mentioned, you can disregard them. Basically those other things are probably a port for a molex power connector and the other ones are pins for a jumper. But if you want to check different jumper settings you should consult with the drive's manual or the manufacturer's website.
Anyway you should be good to go with SATA power and data cables.
Anyway you should be good to go with SATA power and data cables.
TRENDING THREADS
-
-
-
Discussion What's your favourite video game you've been playing?- Started by amdfangirl
- Replies: 4K
-
News Intel terminates x86S initiative — unilateral quest to de-bloat x86 instruction set comes to an end- Started by Admin
- Replies: 31
-
Question What kind of audio setup do you have for your gaming PC?- Started by NickyB
- Replies: 1
Facebook
Twitter
Instagram