Hello,
I recently bought a new CPU and a case.
I put everything in the case and put the new CPU in to it's socket on the motherboard. Didn't get in. There was a bent pin.
I sent the new CPU for repair.
I put my old CPU back to the motherboard and turned PC on.
Fans spined. GPU's fans didn't spin. No video output from MOBO or GPU.
I sent MOBO to service.
Today MOBO is back so I wanted to try the MOBO with the old CPU make sure everything works.
Now fans spin for a second and stop. GPU's fans don't move. No video output.
Same as before I sent MOBO to service except fans don't work this time.
Also hard disk light do not light this time.
Service report mentions they changed a burnt compenent on PCB.
I did paper clip test
Power supply worked. So did fans. And I also heard a sound like something booting.
I red somewhere they had a faulty sata cable and it caused PC to not boot.
So I removed all the cables that goes to hard disks except the one that has windows installed.
This time the fan attached to the motherboard worked. (I didn't attached the heatsink and fans that should be on CPU because once PC works I wanted to plug in my new CPU)
I could see screen is trying to get a signal.
So I plugged my GPU. GPU and fan that worked before didn't work this time.
I removed the GPU and tried again.
I received video output just enough to get into the bios and then it turned itself of.
I attached the heatsink and the fans. This time it didn't boot.
So last week it was working
I changed the case and now I can only attach a fan and a SSD and if it boots it closes itself in 10 seconds.
Any ideas?
I believe case shouldn't have any effect. Am I wrong?
New case has some fans attached to it.
My power supply is 850 wats ASUS PSU
My old CPU is 5600G
New one is 5700x3D
My graphisc card is 5700xt
I recently bought a new CPU and a case.
I put everything in the case and put the new CPU in to it's socket on the motherboard. Didn't get in. There was a bent pin.
I sent the new CPU for repair.
I put my old CPU back to the motherboard and turned PC on.
Fans spined. GPU's fans didn't spin. No video output from MOBO or GPU.
I sent MOBO to service.
Today MOBO is back so I wanted to try the MOBO with the old CPU make sure everything works.
Now fans spin for a second and stop. GPU's fans don't move. No video output.
Same as before I sent MOBO to service except fans don't work this time.
Also hard disk light do not light this time.
Service report mentions they changed a burnt compenent on PCB.
I did paper clip test
Power supply worked. So did fans. And I also heard a sound like something booting.
I red somewhere they had a faulty sata cable and it caused PC to not boot.
So I removed all the cables that goes to hard disks except the one that has windows installed.
This time the fan attached to the motherboard worked. (I didn't attached the heatsink and fans that should be on CPU because once PC works I wanted to plug in my new CPU)
I could see screen is trying to get a signal.
So I plugged my GPU. GPU and fan that worked before didn't work this time.
I removed the GPU and tried again.
I received video output just enough to get into the bios and then it turned itself of.
I attached the heatsink and the fans. This time it didn't boot.
So last week it was working
I changed the case and now I can only attach a fan and a SSD and if it boots it closes itself in 10 seconds.
Any ideas?
I believe case shouldn't have any effect. Am I wrong?
New case has some fans attached to it.
My power supply is 850 wats ASUS PSU
My old CPU is 5600G
New one is 5700x3D
My graphisc card is 5700xt
Facebook
Twitter
Instagram