Question I need some type of wall mount for my monitor.

[beauknowsdiddly]

Hello Everyone!

I currently have a Television monitor for my PC mounted on my wall. But the edges of the display are off the screen. There's resolution that will fix it. So I need to swap it out for a pc monitor that I have. It's an LG 32MA68HY-P 32-Inch monitor it has no holes on the back to use the mount that's already there. Can you help me find some kind of mount that I can use to put this on my wall? It needs to be about 12 inches higher than the top of my desk.

Thank you, thank you!

​

 

[punkncat]

The mount is typically referred to as VESA (with the four screw holes)

In this case, look at the stand that comes with the TV and see if it pulls down to allow a different mount, which will probably be manufacturer only, to mate up there and wall mount. The only way I have seen this type was on an articulating arm, not close surface mount.

 

[USAFRet]

Are you SURE there aren't VESA holes on the back?

The pic at Amazon shows them.

https://www.amazon.com/LG-32MA68HY-P-32-Inch-Monitor-Display/dp/B01IA9FXAO

And the specs at LG refer to 100 x 200 wall mount

LG 32'' Class Full HD IPS LED Monitor (31.5'' Diagonal) (32MA68HY-P) | LG USA

Get information on the LG 32'' Class Full HD IPS LED Monitor (31.5'' Diagonal) (32MA68HY-P). Find pictures, reviews, and tech specs.

www.lg.com

 

[Lutfij]

If you look at the rear of your monitor;

You'll see 4 holes that correspond to the 200mm x100mm spacing. Remove the stand for the monitor and then add a wall mount bracket with those dimensions;

Mounting On A Wall - LG 32MA68HY Owner's Manual [Page 14]

LG 32MA68HY Manual Online: Mounting On A Wall. For proper ventilation, allow a clearance of 10 cm on each side and from the wall. Detailed instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide. 10 cm 10 cm 10 cm 10 cm If...

www.manualslib.com

and you're good to go.

 

[beauknowsdiddly]

If you look at the rear of your monitor;

You'll see 4 holes that correspond to the 200mm x100mm spacing. Remove the stand for the monitor and then add a wall mount bracket with those dimensions;

Mounting On A Wall - LG 32MA68HY Owner's Manual [Page 14]

LG 32MA68HY Manual Online: Mounting On A Wall. For proper ventilation, allow a clearance of 10 cm on each side and from the wall. Detailed instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide. 10 cm 10 cm 10 cm 10 cm If...

www.manualslib.com

and you're good to go.

wow totally missed that! Thank you SO muxh!

 

[Ralston18]

Very good that the monitor supports wall mounting via VESA.

I will add the thought that what is most important overall is that the host wall mount is secured into wall studs and not just the drywall/sheetrock.

Use a stud finder to be sure.

Modern drywall/sheetrock on its' own will not hold for very long especially if some sort of articulating arm is used.....

Just my thoughts on the matter.

 

[beauknowsdiddly]

Very good that the monitor supports wall mounting via VESA.

I will add the thought that what is most important overall is that the host wall mount is secured into wall studs and not just the drywall/sheetrock.

Use a stud finder to be sure.

Modern drywall/sheetrock on its' own will not hold for very long especially if some sort of articulating arm is used.....

Just my thoughts on the matter.

Got it! Thank you very much!
I'm still having the darndest time finding one! The problem is that it needs to be 2 1/2 inches out from the wall because all the plugs are in the back. All the ones I'm finding are either too far out or not far enough. If any jump out at you guys please let me know!

 

[USAFRet]

Got it! Thank you very much!
I'm still having the darndest time finding one! The problem is that it needs to be 2 1/2 inches out from the wall because all the plugs are in the back. All the ones I'm finding are either too far out or not far enough. If any jump out at you guys please let me know!

https://www.amazon.com/Mount-Bracket-Motion-Capacity-EXTENSION/dp/B0756NFFPN

https://www.amazon.com/VideoSecu-ML421B2-Bracket-200x100-Capacity/dp/B000X1UKBU

 

[beauknowsdiddly]

https://www.amazon.com/Mount-Bracket-Motion-Capacity-EXTENSION/dp/B0756NFFPN

https://www.amazon.com/VideoSecu-ML421B2-Bracket-200x100-Capacity/dp/B000X1UKBU

Wow you are good! Thank you USAF! I'm going to try the one the one that extends out since I can get it a few days sooner! I just hope that 200x100 will work. The manual says 7.87 x 3.93. I'm hoping that's the 200x100. Thank you SO much!