I plug my GPU to the MOBO and the PC don't boot

[JLBS]

Hello all,

I purchase a new computer with the following specs:

- Mobo Gigabyte GA-Q67M-D2H-B3 (with basic on board graphics)
- Intel Core i5 2500K @ 3.30 GhZ
- 8 GB RAM DD3
- Windows 7 Professional
- PSU is a VINIK 600 watts

Also, I buy a new GPU card which is a EVGA GTX 1050 TI 4GB DDR5 and a new screen: a Samsung S22E310 Full HD.

The problem is when I connect the GPU to the computer, the machine don't boot at all. Don't even allow to acess the BIOS by pressing the DEL key.

When I remove the GPU from the computer, it work perfectly...

http://www.evga.com/Products/Specs/GPU.aspx?pn=4CAA4209-125F-43F8-B78E-DB56B52FD66E

What can be the solution for this?

Thanks in advance and sorry for my bad english.
José Luis Silva

 

[Calvin7]

Power supply
20 amp single +12v rail = 240 watts
http://www.kabum.com.br/produto/65855/fonte-vinik-atx-204-600w-real-vx600-22095

Lots of power on +5v and +3.3v rails. Not enough +12v power to run video card.

 

[clarkjd]

It may be new to you but a P67 board and 2500k is considered a legacy system. Some Legacy systems require a BIOS flash to support GTX10xx series graphics cards.

 

[JLBS]

Power supply
20 amp single +12v rail = 240 watts
http://www.kabum.com.br/produto/65855/fonte-vinik-atx-204-600w-real-vx600-22095

Lots of power on +5v and +3.3v rails. Not enough +12v power to run video card.

Thanks Calvin...

What could be a good PSU option?

Thanks a lot.

 

[clarkjd]

Power supply
20 amp single +12v rail = 240 watts
http://www.kabum.com.br/produto/65855/fonte-vinik-atx-204-600w-real-vx600-22095

Lots of power on +5v and +3.3v rails. Not enough +12v power to run video card.

Thanks Calvin...

What could be a good PSU option?

Thanks a lot.

Look here:
http://www.tomshardware.com/forum/id-2547993/psu-tier-list.html

Any tier 1 or 2 in the 5-600 watt range:

 

[JLBS]

Thanks Clarkjd!

I pull the trigger on the Corsair CX-600W - CP-9020048-WW 80 Plus Bronze. I think it can handle the machine very well...