i replaced motherboard and wont start up

[Tony_bacame]

I recently bought a ecs machine vol.1 motherboard and i was building it with 32 gb of ram, 750 w psu, and an i7 4790k , once i turned on the pc it showed up a code on the post led . It blinks twice with a letter, it looks like a "J".
I do really need help with this , i dont understand why it keeps doing this, is it the lga 1150 socket that's not working? I also checked the pins and two of them where bended, but luckly i fix it, but as i said, it still has the same problem.

 

[cin19]

You have to find out what letter it is, because according the manual page 81, POST code chechpoints, there is not "J", maybe it is "1" or "7". Also you said the MB had the bent pins, even you fix it, that may still cause problem too.

And one more, which OS do you use? And try use only one stick RAM to see the PC can boot or not after clean the CMOS by the jumper.

 

[Tony_bacame]

You have to find out what letter it is, because according the manual page 81, POST code chechpoints, there is not "J", maybe it is "1" or "7". Also you said the MB had the bent pins, even you fix it, that may still cause problem too.

And one more, which OS do you use? And try use only one stick RAM to see the PC can boot or not after clean the CMOS by the jumper.

well it doesnt matter anymore. find out that there was a missing pin on the socket, so i guess is a GG for that mobo 🙁