I'll start with my PC specs, then the story of the problem.
Motherboard: ASUS TUF Gaming B550M-Plus
GPU: EVGA Nvidia Geforce GTX 1060
PSU: Corsair CX 600 W
CPU: Ryzen 5 3600
RAM: DDR4 Geil EVO X II RGB Sync, 16GB, 3000MHz
So, yesterday my PC was working fine, and recently there was not a single issue relating any performance or crashes.
Today, when I tried to turn it on by morning, it didn't boot. Then the DRAM Q-LED lightened up. I tried to boot several times, and the result was the same, the DRAM Q-LED lighting up.
I updated the BIOS with flashback usb, and then the DRAM Q-LED did not lightened up, but instead the VGA Q-LED lightened up, and the mobo speaker beeped 1 long and 3 shorts, indicating a GPU issue. I tried to boot several times again, and the result was still the VGA Q-LED lighting up, and the same beeps.
Then I tried to reseat the GPU, unplugging the 8-pin PSU and plugging again. After that, and now on, when I try to boot, there is not a single signal from the Q-LED or the mobo speaker, and the system does not boot. The fans from GPU does not start, but it sometimes gives very light bumps.
Someone can help with this issue? There's something that explain the change of behavior after I reseated the GPU?
I'm totally in the dark here. I'll be really grateful for any help and tip anyone can give me =)
Motherboard: ASUS TUF Gaming B550M-Plus
GPU: EVGA Nvidia Geforce GTX 1060
PSU: Corsair CX 600 W
CPU: Ryzen 5 3600
RAM: DDR4 Geil EVO X II RGB Sync, 16GB, 3000MHz
So, yesterday my PC was working fine, and recently there was not a single issue relating any performance or crashes.
Today, when I tried to turn it on by morning, it didn't boot. Then the DRAM Q-LED lightened up. I tried to boot several times, and the result was the same, the DRAM Q-LED lighting up.
I updated the BIOS with flashback usb, and then the DRAM Q-LED did not lightened up, but instead the VGA Q-LED lightened up, and the mobo speaker beeped 1 long and 3 shorts, indicating a GPU issue. I tried to boot several times again, and the result was still the VGA Q-LED lighting up, and the same beeps.
Then I tried to reseat the GPU, unplugging the 8-pin PSU and plugging again. After that, and now on, when I try to boot, there is not a single signal from the Q-LED or the mobo speaker, and the system does not boot. The fans from GPU does not start, but it sometimes gives very light bumps.
Someone can help with this issue? There's something that explain the change of behavior after I reseated the GPU?
I'm totally in the dark here. I'll be really grateful for any help and tip anyone can give me =)