Question I updated the wrong bios now my pc wont boot up what should i do?

[lee.garcia.2000]

I tried using my Asrock AB350M PRO 4 motherboard for a Ryzen 3 2200G processor.

https://imgur.com/a/ZAvpvl6

View: https://imgur.com/a/ZAvpvl6


I used bios flash and update it to P4.90, after that my pc wont boot up.

It turns on for 20-30 secs and it is just looping.

At first I really thought it was the ram, so I decided to use my ram sticks to another system and it works.

I also tried the CMOS battery reset and it does not even work.



So my guess is, do I need a processor that is compatible with the bios update (correct me if im wrong)

https://imgur.com/Yg6QkR5

View: https://imgur.com/Yg6QkR5





If you have any suggestions that would be pretty helpful



THANK YOU GUYS IN ADVANCE

 

[richiestang_78]

Wait do you were able to get into the BIOS with the 2200G installed?

If you were able to flash the BIOS with the 2200G installed then your mobo BIOS already supported the 2200G. IF that's the case and now it doesnt work then the BIOS flash went wrong and chances are you bricked your mobo

 

[lee.garcia.2000]

Wait do you were able to get into the BIOS with the 2200G installed?

If you were able to flash the BIOS with the 2200G installed then your mobo BIOS already supported the 2200G. IF that's the case and now it doesnt work then the BIOS flash went wrong and chances are you bricked your mobo

No, i didnt able to make it to the bios

 

[richiestang_78]

No, i didnt able to make it to the bios

Then yes you will need a compatible 1st gen Ryzen in order to update the BIOS. AMD offered loaner chips free to do this, Im not sure if they still are giving out the 2nd gen upgrade one but you can try

https://www.amd.com/en/support/kb/faq/pa-100

 

[lee.garcia.2000]

well I manage to update the bios to P4.90 with my Ryzen 5 1600, the main problem is It wont boot after the bios update. It turns on for 20-30 secs and it goes off, and it is just looping.

 

[CountMike]

I tried using my Asrock AB350M PRO 4 motherboard for a Ryzen 3 2200G processor.

https://imgur.com/a/ZAvpvl6

View: https://imgur.com/a/ZAvpvl6


I used bios flash and update it to P4.90, after that my pc wont boot up.

It turns on for 20-30 secs and it is just looping.

At first I really thought it was the ram, so I decided to use my ram sticks to another system and it works.

I also tried the CMOS battery reset and it does not even work.



So my guess is, do I need a processor that is compatible with the bios update (correct me if im wrong)

https://imgur.com/Yg6QkR5

View: https://imgur.com/Yg6QkR5





If you have any suggestions that would be pretty helpful



THANK YOU GUYS IN ADVANCE

Which version did you update from ? You might have skipped one. For 4.90 it's clearly marked "If the current BIOS version is older than P3.40, please update BIOS to P3.40(Bridge BIOS) before updating this version. "

 

[lee.garcia.2000]

i did do the P3.40 first then the P4.90