I want to "slave" a tv to receive same channels from a tv receiving Google Fiber Optics programming.

[Chuck7777]

Run two tvs from same google fiber optic tv box and receive same channel on both tvs.

 

[Chuck7777]

Generally I have found you can use a simple video co ax cable from one tv out to the other ones in and the 2nd tv will show whatever the first one is showing.
Works fine in bars, anyway.

My tvs don't have an "out" It was easy on broadband cable with splitters. Are fiber optic cable splitters?, will see.

 

[Chuck7777]

Assuming the fiber optic TV box picks the channel, you'll simply need a distributor for whatever type of output the box has. For example, if you are using an HDMI output on the fiber optic box, you'll need a distributor that has one HDMI input, and at least two HDMI outputs. If the TV box has more than one type of output - for example, an HDMI, and a set of three A/V jacks - you might be able to hook up one TV with out of those outputs, and another with the other.

 

[Chuck7777]

The tvs I want to use as slaves don't have hdmi. some don't have a/v only audio and use coax for video. Thanks.