you CPU has a stock speed of 2.5Ghz and has a max turbo speed of 3.10. turbo mode only kicks in when your computer need more power depending on what you are doing so having it at 3.8 means you are not doing anything on your computer that requires the CPU to run at the max turbo speed
EDIT: it could also mean your CPU is throttling the clockspeed due to heat issues or running it on battery power
if it's at .8ghz, that's cause of Speed step.
Has to be a typo. A 2.5ghz chip that turbos to 3.1ghz won't somehow get stuck at 3.8, unless you're the luckiest person alive, in which case I need to buy a lottery ticket and could use some numbers......
if it's at .8ghz, that's cause of Speed step.
Has to be a typo. A 2.5ghz chip that turbos to 3.1ghz won't somehow get stuck at 3.8, unless you're the luckiest person alive, in which case I need to buy a lottery ticket and could use some numbers......
yea even i looked at it wrong. that CPU is on rated for 3.10 max clock speed. sounds like the OP ignored the decimal point
Are you running a cpu monitoring program? Say CPU-Z or CoreTemp? Turbo speeds are dependent on a number of factors, load and temps being first and foremost. It will run to max turbo speeds only if the system both needs(load), and can(temps and thermal load). XTUs benchmark is just that a benchmark. If your cooling solution or power delivery isn't up to it, that cpu won't run at Max turbo speeds even if the system load would generally call for it.
I, for one, am still confused of what speed your cpu is running to. Is it 3.08? Is it 2.8? Is it 3.8? Is it .08?
If the turbo number is 3.08, you have nothing to worry about, it's a function more of your bus speed running slightly below 100, than your cpu not running to the right turbo ratio. Your ratio is correct(ratio times system clock speed equals cpu clock speed 31x100, or in your case 31x99.99). Your system bus speed is just a touch light, and being a laptop, I'm betting your bios won't let you tinker with bus speeds.