So i just finished installing my new I5 9600k processor.
I overclocked the CPU to 5.0GHz I tried to do 5.2 but it crashed so I went back to 5.
I didn't change anything else besides the CPU multiplier which stayed on 50.
I left everything else on auto and I enabled XMP for the rams as well.
So I did a benchmark using cinabench and I got the following temperatures at the end of the stress test with no crashes:
View: https://imgur.com/6vp75Mv
After i left it for a while and went to clean etc, i got those temperatures:
View: https://imgur.com/Pald6NH
NOTE: The FAN curve for the CPU I had to change a bit because it kept staying at 300RPM for some reason, so I changed to if it hit 50 and above it will change to full speed, and if it is lower than that which you can see in the picture I took after leaving it for a bit it goes to around 1.2k rpm around that.
Do you think those temperatures are fine? and do you think what I have done is completely fine?
And it hasn't crashed so yeah.
Thanks in advance.
EDIT:
The score i got in cinabench was 2912.
I overclocked the CPU to 5.0GHz I tried to do 5.2 but it crashed so I went back to 5.
I didn't change anything else besides the CPU multiplier which stayed on 50.
I left everything else on auto and I enabled XMP for the rams as well.
So I did a benchmark using cinabench and I got the following temperatures at the end of the stress test with no crashes:
View: https://imgur.com/6vp75Mv
After i left it for a while and went to clean etc, i got those temperatures:
View: https://imgur.com/Pald6NH
NOTE: The FAN curve for the CPU I had to change a bit because it kept staying at 300RPM for some reason, so I changed to if it hit 50 and above it will change to full speed, and if it is lower than that which you can see in the picture I took after leaving it for a bit it goes to around 1.2k rpm around that.
Do you think those temperatures are fine? and do you think what I have done is completely fine?
And it hasn't crashed so yeah.
Thanks in advance.
EDIT:
The score i got in cinabench was 2912.
Last edited by a moderator: