i7 7700k core load

[Wanderer27]

Hello community,

When i run small FTT stress test for 6-8 hours one of my cores only achieves 50% load. Prime 95 also says there was a hardware failure. Any advice as to how to achieve consistent 100% load on all cores during small FTT stress testing while overclocking?

 

[biglizard]

Complete system specs?

Core temps?

Probably need to Bump vcore up a notch. Retest.

Read this, http://www.overclock.net/t/1621347/kaby-lake-overclocking-guide-with-statistics

 

[urbancamper]

Complete system specs?

Core temps?

Probably need to Bump vcore up a notch. Retest.

Read this, http://www.overclock.net/t/1621347/kaby-lake-overclocking-guide-with-statistics

All cores need to stay at 100% load for the test to be considered successful. Hardware failure is due to that one core not posting at 100%.