[SOLVED] i7 7700k won't boot

[jacobogarcia89]

Good afternoon
Just i bought an i7 7700k as an upgrade and won't start windows.
-Motherboard Asus b250-a ( updated last firmware)
Previous Cpu: i5 6500

Hdmi direct to mobo. I can see bios screen and change parameters, but after BIOS computer reboot alltime.
Temperature of chip is ok. Got an aftermarket cooler.
Im thinking to format from usb new windows, but im not sure if maybe the problem come from this mobo.
Thank you

 

[jacobogarcia89]

https://ibb.co/PjPC1tW

 

[Mr.Spock]

you may want to check the version of bios supports the 7700K (0308 and up) , if not revert to your old CPU and update.

you may also need to disable XMP and retest that your board boots at base freq

 

[SkyNetRising]

Just i bought an i7 7700k as an upgrade and won't start windows.
-Motherboard Asus b250-a ( updated last firmware)

Probably not related to your issue - but you have ram installed in wrong slots.
Put it into A2 and B2 slots instead to activate dual channel mode.

 

[jacobogarcia89]

Are in a2 and b2 already.

 

[Deleted member 1560910]

Are in a2 and b2 already.

According to your bios is was not. I would suggest like someone said up top put old cpu in and double check bios.

 

[jacobogarcia89]

you may want to check the version of bios supports the 7700K (0308 and up) , if not revert to your old CPU and update.

you may also need to disable XMP and retest that your board boots at base freq

xmp is disable. Mobo is updated. Just i double check trying to updte in asus bios menu.
Im gonna have a look 0308 version, but if mobo is updated to 1205v... Double checked in asus and this motherboard can use with i7 7700k

 

[Deleted member 1560910]

you may want to check the version of bios supports the 7700K (0308 and up) , if not revert to your old CPU and update.

you may also need to disable XMP and retest that your board boots at base freq

Wait a minute he said he updated the firmware not bios

 

[jacobogarcia89]

According to your bios is was not. I would suggest like someone said up top put old cpu in and double check bios.

Yes ur right. Just i swap slots now run in a2, b2.
same insue to load windows

 

[jacobogarcia89]

Wait a minute he said he updated the firmware not bios

I used Uefi bios Utility, EZ flash 3 update, via internet. To the version 1205
So should i put back i5 6500, run cpuz and try to upgrade in different way?

 

[jacobogarcia89]

I flashed 2001 version form usb using Uefi bios flash ( i7 7700k) wont boot windows. I put back the i5 6500, and i got this report in GPUZ: https://postimg.cc/grJBM9nV
Im not sure why i cant boot windows with de i7. I readed another guys using b250m-a with i7 77700k
Should i try to format new Windows from iso USB with de i7 7700k on? Cheers

 

[jacobogarcia89]

There is no way to make it works. Just i returned that i7. Doesnt work even with linux from usb stick