Hi everyone. I was hoping you guys could help me out here
Specs
CPU: i7 930
MOBO: EVGA x58 SLI LE
RAM: Corsair Dominator DDR3 2 x 4GB @ 9-9-9-25 1T @ 1460mhz (1333mhz sticks, but runs @ 1066 default)
GFX: 2 x MSI GTX465
Cooling: h70
PSU: TAGAN Turbo 700W
I recently OC'ed my 930 to 4.0ghz @ 22x183 (turbo'd) and got my RAM timings down to the 9-9-9-25 (it was 11-11-11-30) for the longest time. Im having problems running my games. It feels like my comp is running a bit sluggish when loading them. COD4 for example sits at the initial loading screen for a bit and then finally loads up
Heres my bios setting right now
CPU Clock Ratio ( 22X )
CPU Host Frequency (Mhz) ( 183 )
CPU Uncore Frequency (Mhz) ( 17x )
Spread Spectrum ( Disabled )
PCIE Frequency (Mhz) ( 100 )
Memory Feature
Memory Control Setting ( Enabled )
Memory Frequency ( 2:8 )
Channel Interleave Setting ( 6 Way )
Rank Interleave Setting ( 4 Way )
Parameters
tCL Setting ( 9 )
tRCD Setting ( 9 )
tRP Setting ( 9 )
tRAS Setting ( 25 )
tRFC Setting ( 107 )
Command Rate ( 1T )
Voltage Control
EVGA VDroop Control ( Without VDroop )
CPU VCore ( 1.325 )
CPU VTT Voltage ( +300 )
CPU PLL VCore ( auto )
DIMM Voltage ( 1.650V )
DIMM DQ Vref ( +0 )
QPI PLL VCore ( auto )
IOH VCore ( auto )
IOH/ICH I/O Voltage ( auto )
ICH VCore ( auto )
CPU Feature
Intel SpeedStep ( Disabled )
Turbo Mode Function ( Enabled )
CxE Function ( Disabled )
Execute Disable Bit ( Disabled )
Virtualization Technology ( Disabled )
Logical Processor Setting
Intel HT Technology ( Enabled )
Active Processor Cores ( All )
QPI Settings
QPI Control Settings ( Enabled )
QPI Link Fast Mode ( Enabled )
QPI Frequency Selection ( 4.8 GT/s )
Any help would be appreciated. Im pretty sure its a voltage problem, but im new to the whole OC'ing scene so i cant pinpoint exactly what it is.
Little extra info:
I used to be able to run Crysis on my old OC setup, but i decided to tighten my ram timings because i didnt like the 11-11-11-30 setupd. Before i changed it, i created an OC profile for my 465's and specifically tailored it so that it could run at its max in Crysis. Now when i use that same profile in Crysis, my screen tweaks out, and i get hard locked and have to reset my comp.
When trying to OC, much of the time 1 of my sticks (4gb) wouldnt get recognized in windows so i had to find a QPI setting that would enable me to OC to 4.0ghz, keep my 9-9-9-25 timing and enable full access to my ram. QPI #183 was what i came up with.
Hopefully you guys can take a look at my settings and figure out what would probably work the best.
I am on my computer 24/7 so i will reply back to any questions you guys have for me. Its lights out for me right now, so ill be back in 7-8hrs. THANKS!
-fuzz
Specs
CPU: i7 930
MOBO: EVGA x58 SLI LE
RAM: Corsair Dominator DDR3 2 x 4GB @ 9-9-9-25 1T @ 1460mhz (1333mhz sticks, but runs @ 1066 default)
GFX: 2 x MSI GTX465
Cooling: h70
PSU: TAGAN Turbo 700W
I recently OC'ed my 930 to 4.0ghz @ 22x183 (turbo'd) and got my RAM timings down to the 9-9-9-25 (it was 11-11-11-30) for the longest time. Im having problems running my games. It feels like my comp is running a bit sluggish when loading them. COD4 for example sits at the initial loading screen for a bit and then finally loads up
Heres my bios setting right now
CPU Clock Ratio ( 22X )
CPU Host Frequency (Mhz) ( 183 )
CPU Uncore Frequency (Mhz) ( 17x )
Spread Spectrum ( Disabled )
PCIE Frequency (Mhz) ( 100 )
Memory Feature
Memory Control Setting ( Enabled )
Memory Frequency ( 2:8 )
Channel Interleave Setting ( 6 Way )
Rank Interleave Setting ( 4 Way )
Parameters
tCL Setting ( 9 )
tRCD Setting ( 9 )
tRP Setting ( 9 )
tRAS Setting ( 25 )
tRFC Setting ( 107 )
Command Rate ( 1T )
Voltage Control
EVGA VDroop Control ( Without VDroop )
CPU VCore ( 1.325 )
CPU VTT Voltage ( +300 )
CPU PLL VCore ( auto )
DIMM Voltage ( 1.650V )
DIMM DQ Vref ( +0 )
QPI PLL VCore ( auto )
IOH VCore ( auto )
IOH/ICH I/O Voltage ( auto )
ICH VCore ( auto )
CPU Feature
Intel SpeedStep ( Disabled )
Turbo Mode Function ( Enabled )
CxE Function ( Disabled )
Execute Disable Bit ( Disabled )
Virtualization Technology ( Disabled )
Logical Processor Setting
Intel HT Technology ( Enabled )
Active Processor Cores ( All )
QPI Settings
QPI Control Settings ( Enabled )
QPI Link Fast Mode ( Enabled )
QPI Frequency Selection ( 4.8 GT/s )
Any help would be appreciated. Im pretty sure its a voltage problem, but im new to the whole OC'ing scene so i cant pinpoint exactly what it is.
Little extra info:
I used to be able to run Crysis on my old OC setup, but i decided to tighten my ram timings because i didnt like the 11-11-11-30 setupd. Before i changed it, i created an OC profile for my 465's and specifically tailored it so that it could run at its max in Crysis. Now when i use that same profile in Crysis, my screen tweaks out, and i get hard locked and have to reset my comp.
When trying to OC, much of the time 1 of my sticks (4gb) wouldnt get recognized in windows so i had to find a QPI setting that would enable me to OC to 4.0ghz, keep my 9-9-9-25 timing and enable full access to my ram. QPI #183 was what i came up with.
Hopefully you guys can take a look at my settings and figure out what would probably work the best.
I am on my computer 24/7 so i will reply back to any questions you guys have for me. Its lights out for me right now, so ill be back in 7-8hrs. THANKS!
-fuzz