I recently build a new system for gaming and a bit of handbrake encoding as follows:
PCPartPicker part list: https://uk.pcpartpicker.com/list/nmzPCb
CPU: Intel - Core i9-9900K 3.6 GHz 8-Core Processor (£464.40 @ CCL Computers)
CPU Cooler: Corsair - H100i PRO 75 CFM Liquid CPU Cooler (£98.14 @ Amazon UK)
Motherboard: MSI - MPG Z390M GAMING EDGE AC Micro ATX LGA1151 Motherboard (£164.99 @ Amazon UK)
Memory: Corsair - Vengeance LPX 16 GB (2 x 8 GB) DDR4-3600 Memory (£168.46 @ Amazon UK)
Storage: Samsung - 960 EVO 250 GB M.2-2280 Solid State Drive (£106.99 @ AWD-IT)
Video Card: MSI - GeForce RTX 2080 Ti 11 GB GAMING X TRIO Video Card (£1148.08 @ Box Limited)
Case: Cooler Master - MasterBox Q300L MicroATX Mini Tower Case (£44.99 @ AWD-IT)
Power Supply: Corsair - HX Platinum 1000 W 80+ Platinum Certified Fully-Modular ATX Power Supply (£147.98 @ CCL Computers)
Operating System: Microsoft - Windows 10 Pro OEM 64-bit
I also have 4 case fans (case lies flat) with in takes as follows (all Corsair CO-9050039-WW 120mm):
And outtakes:
However I'm finding the i9 runs at 90C+ under-load and the fans are on full speed. My questions are as follows:
Thanks for your help!
PCPartPicker part list: https://uk.pcpartpicker.com/list/nmzPCb
CPU: Intel - Core i9-9900K 3.6 GHz 8-Core Processor (£464.40 @ CCL Computers)
CPU Cooler: Corsair - H100i PRO 75 CFM Liquid CPU Cooler (£98.14 @ Amazon UK)
Motherboard: MSI - MPG Z390M GAMING EDGE AC Micro ATX LGA1151 Motherboard (£164.99 @ Amazon UK)
Memory: Corsair - Vengeance LPX 16 GB (2 x 8 GB) DDR4-3600 Memory (£168.46 @ Amazon UK)
Storage: Samsung - 960 EVO 250 GB M.2-2280 Solid State Drive (£106.99 @ AWD-IT)
Video Card: MSI - GeForce RTX 2080 Ti 11 GB GAMING X TRIO Video Card (£1148.08 @ Box Limited)
Case: Cooler Master - MasterBox Q300L MicroATX Mini Tower Case (£44.99 @ AWD-IT)
Power Supply: Corsair - HX Platinum 1000 W 80+ Platinum Certified Fully-Modular ATX Power Supply (£147.98 @ CCL Computers)
Operating System: Microsoft - Windows 10 Pro OEM 64-bit
I also have 4 case fans (case lies flat) with in takes as follows (all Corsair CO-9050039-WW 120mm):
- 1 at the bottom (or side by the power supply)
- 2 at the front
And outtakes:
- 1 at the rear top
- 2 as part of the H100i pro
However I'm finding the i9 runs at 90C+ under-load and the fans are on full speed. My questions are as follows:
- Is the H100i pro sufficient for the i9 9900k or do I really need a H150?
- Is it right to have the H100i taking air from the case and pushing this out or should I change so it's sucking cool air in and blowing the hot air into the case?
Thanks for your help!