Question ICE 311MT can support rx 6750xt?

[tridibeshdashingggg]

In the product description of the ICE 311MT i can see the VGA length should be under 265mm. But when I'm measuring it using tape it's like 300mm long.

I'm planning to buy 6750xt, so is this gonna fit in my cabinet?

 

[Lutfij]

I'm planning to buy 6750xt, so is this gonna fit in my cabinet?
You might want to help narrow the search for the GPU , by passing the make and model of the GPU you're looking to purchase. Not all GPU's will have the same length event though the same GPU chip was used to make the card.

Might also want to include a picture of where you measured from and to what point you'd ended in the case.

 

[tridibeshdashingggg]

I'm planning to buy 6750xt, so is this gonna fit in my cabinet?
You might want to help narrow the search for the GPU , by passing the make and model of the GPU you're looking to purchase. Not all GPU's will have the same length event though the same GPU chip was used to make the card.

Might also want to include a picture of where you measured from and to what point you'd ended in the case.

Im planning to buy any of the ASRock rx 6750xt pro oc 12g, or the Asus Dual rx 6750xt oc 12g.

 

[Phaaze88]

You're probably not using the same beginning to end that the maker did, and with a gap of ~35mm too... that's a significant difference for them to be getting wrong... maybe if they missed by a few millimeters, sure, but not THAT much.
PCPartpicker shows 5 6750XTs that fit within the 265mm limit: https://pcpartpicker.com/products/video-card/#c=523&L=69000000,264000000

You can use Partpicker to find other gpus that fit within that limitation.
If ANT cases were in the database, it would be really easy to check by going through partpicker's Completed Builds section and seeing what case and gpu combos folks put together, but they're not, unfortunately.