Review Iceberg Thermal IceFLOE T65 and T95 Review: Small System Cooling

You should have included some stock coolers in comparison. Also no AVX? That's weak. Leave the CPUs at stock, sure, but let them stretch their legs to the fullest to see if this actually an adequate cooling solution. Adequate = no thermal clock throttling or shutdown. This review tells me no useful information at all.

As for the product, looking at the poor quality extruded aluminum, I doubt it performs better than the freebie low TDP stock coolers from Intel or AMD. If it does, then I doubt it costs less than what you can get the higher TDP stock coolers from Ebay, like the Intel ones with the copper core and Wraith Spire/Prism. A lot of people give those away on the forums for free +shipping.
 

CompuTronix

Intel Master
Moderator
Also no AVX? That's weak. Leave the CPUs at stock, sure, but let them stretch their legs to the fullest to see if this actually an adequate cooling solution.
The Author's test methodology is correct.

Prime95 Small FFTs (all AVX test selections disabled) is ideally suited for testing thermal performance, because it conforms to Intel's Datasheets (see page 90, section 5.1.1, 1st paragraph, 2nd sentence)as a steady-state 100% TDP workload with steady Core temperatures. No other non-proprietary utility can so closely replicate Intel's thermal test workload, however, OCCT Small Data Set (Steady Load), SSE Instruction Set is very nearly identical.

When heavy "real-world" AVX workloads are at "peak" load, such as video transcoding apps (which are fluctuating workloads), the workload will typically approach, but not exceed P95 Small FFTs without AVX. The CineBench R23 CPU Render Test shown below is a good example of a utility which replicates real-world AVX transcoding workloads. Prime95 Small FFTs (all AVX test selections enabled) is nearly a 130% workload, which is unrealistically higher than real-world AVX workloads.

Utilities that don't overload or underload your processor will give you a valid thermal baseline. Here’s a comparison of utilities grouped as thermal and stability tests according to % of TDP, averaged across six processor Generations at stock settings rounded to the nearest 5%:

rq8iTvX.jpg


CT :sol:
 
The Author's test methodology is correct.

Prime95 Small FFTs (all AVX test selections disabled) is ideally suited for testing thermal performance, because it conforms to Intel's Datasheets (see page 90, section 5.1.1, 1st paragraph, 2nd sentence)as a steady-state 100% TDP workload with steady Core temperatures. No other non-proprietary utility can so closely replicate Intel's thermal test workload, however, OCCT Small Data (Steady Load), SSE Instruction Set is very nearly identical.

When heavy "real-world" AVX workloads are at "peak" load, such as video transcoding apps (which are fluctuating workloads), the workload will typically approach, but not exceed P95 Small FFTs without AVX. The CineBench R23 CPU Render Test shown below is a good example of a utility which replicates real-world AVX transcoding workloads. Prime95 Small FFTs (all AVX test selections enabled) is nearly a 130% workload, which is unrealistically higher than real-world AVX workloads.

rq8iTvX.jpg


CT :sol:

Be a man or be in the band.
 

TRENDING THREADS