ide ata/atapi controllers

nick_v15

Prominent
BANNED
Jan 7, 2018
365
18
795
2
I have 3 drives.2 SSDs and 1 HDD.Under ide ata/atapi controllers in device manager it shows only 2 AMD SATA Controller.Is that normal?
 

nick_v15

Prominent
BANNED
Jan 7, 2018
365
18
795
2

So showing 2 "AMD sata controller" is normal?
 
yes that is NORMAL. that is the IDE ATA/ATAPI so that is your sata controller under that category post your specs so we can see if it should be showing one or two. it's possible. does it show them both as operational and ok? this is the controller stuff, not the devices themselves.
 
looking at the number of ports available it would not surprise me if you did have two controllers.

Storage Interface
1 x M.2 connector (Socket 3, M key, type 2242/2260/2280/22110 SATA and PCIe x4*/x2 SSD support)
* Actual support may vary by CPU.
2 x SATA Express connectors
8 x SATA 6Gb/s connectors
Support for RAID 0, RAID 1, and RAID 10
* Refer to "1-8 Internal Connectors," for the installation notices for the M.2 and SATA connectors.

that series likes to dual everything up it seems
 

ASK THE COMMUNITY

TRENDING THREADS