[SOLVED] iGPU not working on new motherboard ?

[LostInMyHead]

Here is my build:


Gigabyte Z790 AORUS Master EATX motherboard with DDR5
Intel Core i9-13900
CORSAIR VENGEANCE DDR5 RAM 96GB (2x48GB) 5200MHz CL38

I just started to put this together and wanted to make sure the basics would get me to the BIOS. I installed the CPU, CPU cooler, 2 sticks of memory, nothing else. I connected my monitor to the motherboard's DP port.

Turn it on, the MB goes through the various stages of the 2 red error codes display and then stops at "Ad" This indicated "Issue Ready To Boot event for OS Boot". I said, ok, great, but where is the screen output? The monitor is just sitting there complaining about no input. The i9-13900 is supposed to have an integrated GPU so I expect it to see the integrated GPU as the graphics device. Based on the error, I am assuming it can't.

I should also add. The 4 light LED at the bottom has the "VGA" lit..

Tried with one stick of memory, 2 sticks of memory. Reset CMOS shorting the pins (while unplugged).

I can't figure out what else to check. Do I have a DOA MB? Do I have a DOA CPU? Both?

 

[LostInMyHead]

Q-flashed to the latest BIOS and all is working now..