Question im bad at computers just getting started

[vazzy12]

so i have this
https://i.dell.com/sites/csdocument...nts/en/us/Dell_Precision_T3610_Spec_Sheet.pdf
and im looking to get a better case would it fit in this
https://www.pccasegear.com/products/46857/corsair-icue-220t-rgb-airflow-tg-mid-tower-case-black
if not what is another case that looks good, around the same budget ($150au,$100us) and could the motherboard in it cause im not sure what size the motherboard is\
thanks for the help

 

[R_1]

the motherboard is NOT ATX/mATX/ITX that case will not work.
it looks to be EATX from the images on google. it could be a dell special designed to pair with that chassis.
the mounting holes are throwing me EATX is rectangular with holes along the edges, this has the tab at the IO and the holes would be set too far back to fit EATX mounting.

 

[tennis2]

Yeah, that mobo doesn't look standard. Why do you want a new case?

 

[vazzy12]

Yeah, that mobo doesn't look standard. Why do you want a new case?

yeah i didn't think it was standard and i wanted a new case because the airflow is really really bad

 

[vazzy12]

the motherboard is NOT ATX/mATX/ITX that case will not work.
it looks to be EATX from the images on google. it could be a dell special designed to pair with that chassis.
the mounting holes are throwing me EATX is rectangular with holes along the edges, this has the tab at the IO and the holes would be set too far back to fit EATX mounting.

ok thanks

 

[tennis2]

Just a shot, but are there any areas in the front of the case where an extra fan could/ should be mounted?

Failing that, you can always drill a hole in the side panel of the case with a hole saw and install a fan there. Pretty simple and very effective. (I've done it)

I use anti-vibration fan pegs like these