Question im not getting any display on my monitors or power to my usb ports after switching motherboards ?

[Imjustatray]

i switched to an asus prime b560 plus motherboard and its giving me no display and no power to my usb ports and i dont know what do to

 

[Phillip Corcoran]

You are strongly advised to perform a fresh install of Windows after changing the motherboard --- have you done this ?

 

[NameChanged38]

Sounds like it's failing to POST. Does it have diagnostic lights, or giving you beep codes? Right off the bat I would ensure the RAM is installed in the proper slots as per the manual. Also make sure the 8 pin CPU power is plugged in & fully locked in.

If everything is on the up & up so far, I'd reseat the RAM. Perhaps try with 1 stick of RAM in the primary slot to test. If nothing, reseat the CPU. Ensure it's oriented properly. Don't bother with thermal paste until you get life out of it.

 

[Imjustatray]

You are strongly advised to perform a fresh install of Windows after changing the motherboard --- have you done this ?

how would i do this if the mobo wont allow me to get display on my monitors?

 

[Phillip Corcoran]

Please post full specs of your system