Hey guys, i do start to think this is paranormal?
First to put you on update ...i bought my PC all mounted in 2016
if i'm not bad these were the components of the old PC
then i changed to GTX 1070 a year ago (got it from crypto miner, best deal ever (no sarcasm)) still using this graphics
i upgraded to 9 gen Mobo and i5 9600k because my old i5 passed out
So here's the ISSUE, my pc has been having the same problem over and over again...
I turn on the pc, it shows the rgb lights, etc, but no screen.... i take the graphics card off and try with cpu graphics... No screen either...
i take the RAM off and on and No screen.... i take the mobo battery off wait 15 mins and no screen mouse and keyboard seems to be working (sometimes)
Sometimes it has the issue that when i power off it restarts by itself .... other times it doesn't (so that makes me very confused because i don't exactly know if it's cpu problem or Ram?)
It sometimes boots, when i just shake the Chasis, press the components a bit, and take off and on the RAMS or Graphics card and let it rest like 30 mins
However i changed the MOBO because a technician told me to change the mobo (Here where i live in Colombia technicians only know about old office PCs)
maybe the mobo was kinda broken... so i changed it and it runned, all good, but the other day, again the same issue, it seems to start but it doesn't show screen video
So i changed the CPU because i found a technician specialized in gamer pcs, but he don't seems to be a guru, however he might have been the most helpful...
he told me that the old cpu was dead and couldn't be recovered
But once changed the CPU it stills have the same issue, turning on, no screen sometimes it recognizes the keyboard and mouse, sometimes no, etc (me struggling with lot of work)
Then i though of the RAM, i changed the RAM, upgraded to 16Gb (8gb x 2)
STILL HAPPENS the same issue....
the only elder warrior of the pc that has survived all along was the Graphics cards, and the Chasis (suspicious chasis)
The technician told me the graphics card is working fine the processor and ram too, when he tests in his workstation problem don't usually happens, it happens a bit, but not for long like happens with me... still the issue is hapenning...
So yees... i forgot to say i didn't had an UPS stabilizer on my old pc xd, i bought this when i changed the mobo, cpu and rams, so it might something to do with voltage? since there are no constantly but there has been light shutdowns like 3 months, or if they are working on the cables light shutdown may happen like 4 times in a day, so that's why i bought the stabilizer so it can't be voltage issues right?
i've changed all... and this problems is still cracking me down, i'm about to give up this is going me crazy, i have fear of cleaning pc because i know every time i touch it a bit, the issue starts, the less i touch it, no issues happens, i still clean it like 1 or 2 months, i wish i could do it more often, but this issue appears whenever i touch this PC components...
So this are the things that haven't been changed
i forgot to said, psu have been changed too for a corsair cv650, i tried with a seasonic but it came not working...
Graphics Card and Chasis (The chases could see some suspicious to me, because it has power cables, usb, audio etc that connects to the mobo, maybe the chasis cables are bad?)
So this is my actual PC components
i think this pc is damned...
i'm about to upgrade to i9 10gen , more Ram and upgrade mobo to 10 gen and change Chasis too.. im gonna pass from micro to atx i find it very complicated to look at components with a big fan on cpu and long graphics card on micro atx (that's the reason)
i forgor to say i live near to the beach, dust and salt is a problem for my pc, graphics card and chasis that are the oldest, gets a little rusted, so i need to clean this pc several times but as i told you i have fear to clean it because of this issue
also for the record, monitor and hdmi cable are working fine! i tested all that
But honestly i have fear of updating this damned PC, i have 90% faith this issue will still happens if i upgrade the components i said!
how can you guys help me on a diagnosis of this cursed thing? any info you need let me know will be very Thankful!
First to put you on update ...i bought my PC all mounted in 2016
if i'm not bad these were the components of the old PC
- cheap psu white iceberg 450w
- Core i5 6600k
- Basic asrock board (don't remember)
- Chasis Iceberg Crystal G5
- i don't remember the ram but it was one of the cheaps of 8gb
- gtx 950 Zotac.
then i changed to GTX 1070 a year ago (got it from crypto miner, best deal ever (no sarcasm)) still using this graphics
i upgraded to 9 gen Mobo and i5 9600k because my old i5 passed out
So here's the ISSUE, my pc has been having the same problem over and over again...
I turn on the pc, it shows the rgb lights, etc, but no screen.... i take the graphics card off and try with cpu graphics... No screen either...
i take the RAM off and on and No screen.... i take the mobo battery off wait 15 mins and no screen mouse and keyboard seems to be working (sometimes)
Sometimes it has the issue that when i power off it restarts by itself .... other times it doesn't (so that makes me very confused because i don't exactly know if it's cpu problem or Ram?)
It sometimes boots, when i just shake the Chasis, press the components a bit, and take off and on the RAMS or Graphics card and let it rest like 30 mins
However i changed the MOBO because a technician told me to change the mobo (Here where i live in Colombia technicians only know about old office PCs)
maybe the mobo was kinda broken... so i changed it and it runned, all good, but the other day, again the same issue, it seems to start but it doesn't show screen video
So i changed the CPU because i found a technician specialized in gamer pcs, but he don't seems to be a guru, however he might have been the most helpful...
he told me that the old cpu was dead and couldn't be recovered
But once changed the CPU it stills have the same issue, turning on, no screen sometimes it recognizes the keyboard and mouse, sometimes no, etc (me struggling with lot of work)
Then i though of the RAM, i changed the RAM, upgraded to 16Gb (8gb x 2)
STILL HAPPENS the same issue....
the only elder warrior of the pc that has survived all along was the Graphics cards, and the Chasis (suspicious chasis)
The technician told me the graphics card is working fine the processor and ram too, when he tests in his workstation problem don't usually happens, it happens a bit, but not for long like happens with me... still the issue is hapenning...
So yees... i forgot to say i didn't had an UPS stabilizer on my old pc xd, i bought this when i changed the mobo, cpu and rams, so it might something to do with voltage? since there are no constantly but there has been light shutdowns like 3 months, or if they are working on the cables light shutdown may happen like 4 times in a day, so that's why i bought the stabilizer so it can't be voltage issues right?
i've changed all... and this problems is still cracking me down, i'm about to give up this is going me crazy, i have fear of cleaning pc because i know every time i touch it a bit, the issue starts, the less i touch it, no issues happens, i still clean it like 1 or 2 months, i wish i could do it more often, but this issue appears whenever i touch this PC components...
So this are the things that haven't been changed
i forgot to said, psu have been changed too for a corsair cv650, i tried with a seasonic but it came not working...
Graphics Card and Chasis (The chases could see some suspicious to me, because it has power cables, usb, audio etc that connects to the mobo, maybe the chasis cables are bad?)
So this is my actual PC components
- I5 9600k (fan cooler master hyper 212 very stretched by the chasis case)
- Gigabyte b350m Wifi
- Ram Oloy x2 8gb (16gb)
- Strix Gtx 1070
- Corsair CV 650w silver or gold (don't remember)
i think this pc is damned...
i'm about to upgrade to i9 10gen , more Ram and upgrade mobo to 10 gen and change Chasis too.. im gonna pass from micro to atx i find it very complicated to look at components with a big fan on cpu and long graphics card on micro atx (that's the reason)
i forgor to say i live near to the beach, dust and salt is a problem for my pc, graphics card and chasis that are the oldest, gets a little rusted, so i need to clean this pc several times but as i told you i have fear to clean it because of this issue
also for the record, monitor and hdmi cable are working fine! i tested all that
But honestly i have fear of updating this damned PC, i have 90% faith this issue will still happens if i upgrade the components i said!
how can you guys help me on a diagnosis of this cursed thing? any info you need let me know will be very Thankful!
Last edited: