Individual RGB LED on Motherboard Header

[oliver.zabraczky]

Hi!
Is it possible to connect a single RGB LED to a motherboard header? Aquacomputer has an RGB Illumination module: https://shop.aquacomputer.de/product_info.php?products_id=2664. Barrow has an RGB plug also: https://freezemod.com/product/barrow-g14-thread-acrylic-led-light-water-sealing-lock-end-plug-ygy-01/

I don't know if it is possible to control these via the mobo. Or if any other product exist which is compatible with the headers.

My plan is to illuminate the reservoir and the GPU water block with 2 single LEDS.

Thanks,
Oliver

 

[nitinvaid20]

If you are asking about the RGB Led Strip Then yes you can use it with the onboard RGB headers but that depends if it will fin on it or not
as in my case i am using m RGB Led strip which has 4Pin Power connected with Cooler master RGB Controller and it works great

 

[oliver.zabraczky]

If you are asking about the RGB Led Strip Then yes you can use it with the onboard RGB headers but that depends if it will fin on it or not
as in my case i am using m RGB Led strip which has 4Pin Power connected with Cooler master RGB Controller and it works great

Thanks nitinavaid20 for Your answer. I would like to use singe LEDs. I have a few illumination G1/4" plugs like this:https://www.alphacool.com/shop/reservoirs/tubing-reservoir/reservoir-accessories/16955/alphacool-plexi-beleuchtungsmodul-g1/4-geraendelt-v.2?c=20703. They have a hole in them for a bare LED. All I have found are strips.