Inno3d 8800 gts 512 OC

lamda2010

Distinguished
Dec 25, 2009
22
0
18,510
Pleas help me to know that my power supply is sufficient for my graphic card (amperage & Watt) or not;

Power Supply: OCZ SXS 600W
CPU: Q9300
MB: GA x38t-dq6
Memory: 2GB Dual DDR3 OCZ 1333 Gold
Graphic: inno3d 8800 gts 512
SATA: 1*500GB ; DVD ROM ; DVD RW ;
TV CARD: Leadtek DV2000;
Modem: Dailup

Amperage is important for me?!!!
 
Solution
http://archive.atomicmpc.com.au/forums.asp?s=2&c=7&t=9354&p=0
8800 GTS 38W-58W-99W ² (512MB G92)

http://www.ocztechnology.com/drivers/600wchart.JPG
425W @12V

and since the rest of the components aren't power hogs either, you have plenty of power to run the rig.

edit:
here's some power comsumption numbers for a Q9300 rig with 8800GTX
http://www.xbitlabs.com/articles/cpu/display/core2quad-q9300_13.html#sect0
222W under full cpu load (at the wall socket), graphics idling.
assuming 80% psu efficiency and compensating for craphics, your system might draw something closer to 210W under full load from the psu

Kari

Splendid
http://archive.atomicmpc.com.au/forums.asp?s=2&c=7&t=9354&p=0
8800 GTS 38W-58W-99W ² (512MB G92)

http://www.ocztechnology.com/drivers/600wchart.JPG
425W @12V

and since the rest of the components aren't power hogs either, you have plenty of power to run the rig.

edit:
here's some power comsumption numbers for a Q9300 rig with 8800GTX
http://www.xbitlabs.com/articles/cpu/display/core2quad-q9300_13.html#sect0
222W under full cpu load (at the wall socket), graphics idling.
assuming 80% psu efficiency and compensating for craphics, your system might draw something closer to 210W under full load from the psu
 
Solution

lamda2010

Distinguished
Dec 25, 2009
22
0
18,510


Thanks for reply
But SXS 600w has current limitation in 12V rails.

http://www.ocztechnology.com/drivers/600wchart.JPG
 

Kari

Splendid
yes, it has. But it doesn't really matter, since all of the cables that deliver any meaningfull amount of power should be connected to different rails allready at the factory. For example the 4/8 pin cpu powercable is in 1st, all of the molex/sata plugs are on the 2nd, pcie plugs have their own rail etc.

and 18A*12V=216W so that's quite enough for whatever might be connected to one rail
 

lamda2010

Distinguished
Dec 25, 2009
22
0
18,510


Thanks.