Question Installation of Samsung 860 QVO

[SnoopyDog]

Hello everyone, I have bought a Samsung 860 QVO today from Micro Center store and I have noticed that it doesn't come with a 2.5" bracket. So, I will have to get a 2.5" to 3.5" bracket converter from Amazon. However, I have a Corsair Graphite Series 600t mid tower and it already have plastic 3.5 hard drive plastic brackets installed. My question is: Does the 2.5 bracket adapter fit on those 3.5 brackets? Let me know thanks.

Not sure the rules on putting a link on this post but here is the link to a picture of what I am talking about: https://www.corsair.com/medias/sys_...hae/9110636036126/-CC600T-Gallery-600T-08.png

Thanks again. Looking forward to your response.

 

[NightHawkRMX]

You dont need any adapter. According to Corsair, your case has
Case Drive Bays 3.5"
6
Case Drive Bays 2.5"
6

I believe you dont need an adapter to put the 2.5in drive in the 3.5in bay. Im not sure how it screws in tho.

 

[USAFRet]

Your case has dedicated mounts for a drive that size. No adapter needed.

 

[PC Tailor]

Agreed with both above.
The screws are in the bottom and the side. Basically you move the SSD to one side, screw it in to one side of the bay, then on the screw in the other side from the bottom of the tray.

Skip to 5:30

View: https://www.youtube.com/watch?v=cmdKu5i2ZB8

 

[SnoopyDog]

Agreed with both above.
The screws are in the bottom and the side. Basically you move the SSD to one side, screw it in to one side of the bay, then on the screw in the other side from the bottom of the tray.

Skip to 5:30

View: https://www.youtube.com/watch?v=cmdKu5i2ZB8

Thanks for that video. I did saw the specs on my case and it said SSD compability and wasn't sure what they mean by that until you showed me the video. That's helpful. Now I would need to order some 2.5" SSD screws from Amazon. Thanks PC Tailor.


Thanks to PC Tailor, USAFRet, and remixislandmusic for your responses.