installed a new hdd bsod with various errors

spicyninja7

Reputable
Nov 11, 2015
3
0
4,510
0
I recently installed a new hdd and shortly after my computer will blue screen with various errors mainly paging error in non paging area, IRQL not less or equal, kmode exception not handled and unexpected kernal mode trap
 

D_Know_WD

Judicious
Jul 30, 2014
6,635
0
35,960
2,602
Hi there spicyninja7,

Is this a new OS drive or a secondary one?
In case it is a secondary one, you can take it out of the system and see whether the issue persists. In case it doesn't, you can double check the connections: attach the drive with different SATA and power cables to a different SATA port. Also, you can test it: http://www.tomshardware.co.uk/forum/282651-32-best-diagnostic-testing-utility

In case it is your OS drive, you can try basically the same things: cables, ports, test. If the issue persists, you can back up the data stored on in and perform a clean OS installation.

Hope this will help,
D_Know_WD
 

spicyninja7

Reputable
Nov 11, 2015
3
0
4,510
0


It's a new non os hdd for storage, I tried running my computer with the new hdd unplugged and it still crashed. I have an older hdd and I tried that one plugged in only too. No combination of drives let's my computer run without crashing, the only drive I left in was my ssd with my os on it and it still crashed, even after installing a clean installation of Windows.

 

spicyninja7

Reputable
Nov 11, 2015
3
0
4,510
0
I5 3570k cpu
Msi z77a g45 mobo
2x4gd 2400 ram
Evga 660 ti gpu
Windows 10 original but reinstalled to Windows 7
650 with psu
Some 250 gb wd is my old hdd
My new hdd is a Hitachi ultrastar 2tb 7k4000 and my os is on my ssd Samsung Evo 850
Also I already tried the solution from the post you linked. My computer still crashed