Installed my new PSU yesterday, just one concern..

[aafusc2988]

So I jsut got this PSU in the mail and installed yesterday:

http://www.newegg.com/Product/Product.aspx?Item=N82E16817139148

I love it, aside from the fact it was $69.99 when I bought it (11/30/16) - $10 mail in rebate.. now it's $59.99 with a $20 mail-in rebate!! WTF!!

Anyways, when I was taking out the old stock PSU, I had to remove my GPU because the 4-pin mobo connector wouldn't come out behind the GPU since there was no room. I totally forgot that I had the GPU screwed in on the left and kept trying to pull it out on the right side by the PCIe clip.

I ended up pulling the clip up and it made a breaking sound but it's still attached, just doesn't stay down when you push it down now. Finally I realized I had to unscrew the left side... I was not pulling too hard but just worried about what could have happened on that left side. Since I was pulling the right side and it was attached to the left still. I tried several times to get the card out before realizing.. I feel so stupid.

PSU is great and everything powered up.. played some Skyrim and it seemed fine..

 

[Zerk2012]

If everything is working then no need to stress it.
I have seen then with the clip broke off and everything still works.

 

[aafusc2988]

It's not so much the clip that worries me as me tugging on the right side pretty firmly and it still having been attached on the left. Wouldn't that cause some sort of digging in motion or something?

 

[Zerk2012]

Everything is working so everything is working. The contacts are on the side of the slot.