Question Installed new H100i-Temps all over

May 8, 2020
2
0
10
0
So I have an i9 9900k and had a cooler on it from EVGA, replaced it with a Corsair H100i and all is fine except that my temps are all over the place while using HWMonitor. I ran Lightroom and the PC restarted, take it temps got too hot. I put a small pea sized thermal paste and all, making sure all connections were good. Temps at idle are about 30 Celsius. Thoughts?
 
May 8, 2020
2
0
10
0
CPUID HWMonitor Report
-------------------------------------------------------------------------

HWMonitor version 1.4.1.0

Monitoring
-------------------------------------------------------------------------

Mainboard Model ROG STRIX Z390-E GAMING (0x000005FD - 0xD1667570)

Hardware Monitors
-------------------------------------------------------------------------

Hardware monitor Nuvoton NCT6791D
Voltage 0 5.00 Volts [0x7D] (+5V)
Voltage 1 3.39 Volts [0xD4] (+3.3V)
Voltage 2 12.10 Volts [0x7E] (+12V)
Voltage 3 1.31 Volts [0x52] (VCCIO)
Voltage 4 1.20 Volts [0x4B] (System Agent)
Voltage 5 0.82 Volts [0x5C] (VCORE)
Voltage 6 1.07 Volts [0x86] (PCH)
Temperature 0 31 degC (87 degF) [0x1F] (Mainboard)
Temperature 1 37 degC (98 degF) [0x25] (CPU)
Temperature 2 31 degC (87 degF) [0x1F] (TMPIN2)
Temperature 3 33 degC (91 degF) [0x21] (TMPIN3)
Temperature 5 15 degC (59 degF) [0xF] (TMPIN5)
Temperature 6 9 degC (48 degF) [0x9] (TMPIN6)
Fan 1 938 RPM [0x3AA] (CPU)
Fan 2 892 RPM [0x37C] (Chassis #2)
Fan 5 1578 RPM [0x62A] (Chassis #5)
Fan 6 3846 RPM [0xF06] (Chassis #6)

Hardware monitor DIMM
Temperature 0 35 degC (95 degF) [0xC234] (core)

Hardware monitor DIMM
Temperature 0 33 degC (90 degF) [0xC20C] (core)

Hardware monitor DIMM
Temperature 0 36 degC (96 degF) [0xC23C] (core)

Hardware monitor DIMM
Temperature 0 36 degC (96 degF) [0xC240] (core)

Hardware monitor D3D

Hardware monitor NVIDIA NVAPI
Voltage 0 0.63 Volts [0x271] (GPU)
Power 0 6.60 pc (GPU)
Temperature 0 43 degC (109 degF) [0x2B] (GPU)
Fan 0 1146 RPM [0x47A] (GPU #0)
Fan PWM 0 29 pc [0x1D] (FANPWMIN0)
Clock Speed 0 164.50 MHz [0xA4] (Graphics)
Clock Speed 1 405.00 MHz [0x195] (Memory)
Clock Speed 2 n.a. (Processor)

Processors
-------------------------------------------------------------------------

Number of sockets 1
Number of threads 16

APICs
-------------------------------------------------------------------------

Processors Information
-------------------------------------------------------------------------

Socket 1 ID = 0
Number of cores 8 (max 8)
Number of threads 16 (max 16)
Manufacturer GenuineIntel
Name Intel Core i9 9900K
Codename Coffee Lake
Specification Intel(R) Core(TM) i9-9900K CPU @ 3.60GHz
Package (platform ID) Socket 1151 LGA (0x1)
CPUID 6.E.D
Extended CPUID 6.9E
Core Stepping R0
Technology 14 nm
TDP Limit 95.0 Watts
Tjmax 100.0 °C
Core Speed 3899.1 MHz
Multiplier x Bus Speed 39.0 x 100.0 MHz
Base frequency (cores) 100.0 MHz
Base frequency (ext.) 100.0 MHz
Stock frequency 3600 MHz
Max frequency 5100 MHz
Instructions sets MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, EM64T, VT-x, AES, AVX, AVX2, FMA3

Microcode Revision 0xCC

Turbo Mode supported, enabled
Max non-turbo ratio 36x
Max turbo ratio 51x
Max efficiency ratio 8x
Speedshift Autonomous
O/C bins unlimited
Ratio 1 core 51x
Ratio 2 cores 51x
Ratio 3 cores 51x
Ratio 4 cores 51x
Ratio 5 cores 51x
Ratio 6 cores 51x
Ratio 7 cores 51x
Ratio 8 cores 51x
IA Voltage Mode PCU adaptive
IA Voltage Target 1352 mV
IA Voltage Offset 0 mV
GT Voltage Mode PCU adaptive
GT Voltage Offset 0 mV
LLC/Ring Voltage Mode PCU adaptive
LLC/Ring Voltage Target 1352 mV
LLC/Ring Voltage Offset 0 mV
Agent Voltage Mode PCU adaptive
Agent Voltage Offset 0 mV
TDP Level 95.0 W @ 36x

Temperature 0 39 degC (102 degF) (Package)
Temperature 1 36 degC (96 degF) (Core #0)
Temperature 2 38 degC (100 degF) (Core #1)
Temperature 3 34 degC (93 degF) (Core #2)
Temperature 4 36 degC (96 degF) (Core #3)
Temperature 5 35 degC (95 degF) (Core #4)
Temperature 6 34 degC (93 degF) (Core #5)
Temperature 7 35 degC (95 degF) (Core #6)
Temperature 8 34 degC (93 degF) (Core #7)
Voltage 0 1.35 Volts (IA)
Voltage 1 +0.00 Volts (GT Offset)
Voltage 2 1.35 Volts (LLC/Ring)
Voltage 3 +0.00 Volts (System Agent Offset)
Voltage 4 1.32 Volts (VID #0)
Voltage 5 1.32 Volts (VID #1)
Voltage 6 1.32 Volts (VID #2)
Voltage 7 1.33 Volts (VID #3)
Voltage 8 1.33 Volts (VID #4)
Voltage 9 1.33 Volts (VID #5)
Voltage 10 1.33 Volts (VID #6)
Voltage 11 1.33 Volts (VID #7)
Power 00 23.05 W (Package)
Power 01 18.72 W (IA Cores)
Power 02 n.a. (GT)
Power 03 4.33 W (Uncore)
Power 04 2.85 W (DRAM)
Clock Speed 0 3899.06 MHz (Core #0)
Clock Speed 1 3899.06 MHz (Core #1)
Clock Speed 2 3899.06 MHz (Core #2)
Clock Speed 3 3899.06 MHz (Core #3)
Clock Speed 4 3899.06 MHz (Core #4)
Clock Speed 5 3899.06 MHz (Core #5)
Clock Speed 6 3899.06 MHz (Core #6)
Clock Speed 7 3899.06 MHz (Core #7)
Core 0 max ratio 50.0 (effective 51.0)
Core 1 max ratio 50.0 (effective 51.0)
Core 2 max ratio 50.0 (effective 51.0)
Core 3 max ratio 50.0 (effective 51.0)
Core 4 max ratio 50.0 (effective 51.0)
Core 5 max ratio 50.0 (effective 51.0)
Core 6 max ratio 50.0 (effective 51.0)
Core 7 max ratio 50.0 (effective 51.0)
 
Last edited by a moderator:
Too much information. The only thing I wanted to know is your temperature at full load.
From what I could see in that massive wall of text was upper 90, with one core at 100.

I'd make sure that the cooler is actually properly mounted and the thermal paste is making good contact. If you have more that is.

I'd also see if you have any oc applied and turn it off for now.

You're using a 240mm cooler on one of the hottest cpus. You'll run warm regardless but where it's at is too high.
 

ASK THE COMMUNITY

TRENDING THREADS