Installed New Ram: No startup beeps, Fans spin, No video output

[Lunafer]

Hello Tom's Hardware community!

I recently bought 32GB (16x2) of new ram to install onto my computer. I researched as best i could to determine that it should be compatible with my motherboard. It fits into the slots perfectly and everything but when i turn my computer on, there are no startup beeps or any display on my monitors but my fans spin. Whenever I put my old RAM back in, everything works fine. To give context, I upgraded from 4GB of RAM and am making the jump to 32GB. I have not tried resetting CMOS yet but have studied the BIOS settings a little bit just to find out that all of it matches that of my new RAM.

SPECS

Motherboard: http://www.crucial.com/usa/en/scanview/7EE8568F31D926C3#memoryResults
Old RAM (that works): DDR3 4GB 1600MHz CAS 11 (The frequency is 1600 MHz but it runs at 800 or so it says)
New RAM (doesn't work): https://www.newegg.com/Product/Product.aspx?Item=N82E16820014051

Let me know if you need specs on anything else. Sorry I couldn't find what exact RAM i currently use.

 

[Zerk2012]

ECC Registered
That memory is not supported.
You should of used the memory finder that you linked and got a 4X8GB set. Then reset CMOS and installed the new memory.

 

[mcan226]

Your mobo's page says it takes up to 1333 h

regardless, try installing only one of the rams. Maybe one of them is faulty...

 

[Lunafer]

ECC Registered
That memory is not supported.
You should of used the memory finder that you linked and got a 4X8GB set. Then reset CMOS and installed the new memory.

If it isn't compatible could you tell me why? I don't want to make this mistake again lol

 

[mcan226]

If it isn't compatible could you tell me why? I don't want to make this mistake again lol

Your mobo's user guide should tell.