Question Installed New Ram stick and now i have no display tried troubleshooting but nothing so far

wilkin823

Honorable
May 22, 2014
16
0
10,510
0
I tried installing a 8gb Corsair Vengance into my compluter and now i can not get a display.
I have tried uninstalling it and only using the old ram. i tried using one ram stick in each slot. i have tried removing the motherboard battery for 30 minutes. i have switched graphics cards and processors. I am guessing it is my motherboard but all my peripherals light up all fans are working and my mother board has lights that show what is plugged in and all of those are lit up.

Parts: https://pcpartpicker.com/user/wilkin823/saved/FQtNNG
 
OK. It's unlikely you'd cause damage doing things properly but in my position I can't assume an unprepared person would plug in ram with the PC on or something clearly wrong. Are you sure the monitor is working or have others to test with?
 
Try pulling all the RAM out and starting with no memory. Of course it won't boot but the point is to clear the system. If there is a motherboard buzzer that would produce a beep code (bad news if it doesn't) though many new boards don't have that. Shut if down after thirty seconds or so and re-install the memory.
 

ASK THE COMMUNITY

TRENDING THREADS