Question Installing DeepCool Gammaxx L240

[hannya8716]

Hi, I am completely new to AIO Liquid Coolers. I bought a deepcool gammaxx l240 however I am confused with the cables. the pump and fans have 2 sets of cables each. I was just informed one is for power and one is for rgb. I am completely lost where to plug those connectors. I am using tuf z390 motherboard.

 

[Barty1884]

Manual here:
http://www.deepcool.com/product/LiquidCooler/2018-08/209_9434.shtml

Pump goes directly to the motherboard (CPU_Fan or PUMP_Header) depending on the motherboard. RGB from the pump runs to the 4x1 splitter.
Fans connect to the fan hub, and the RGB output from the fans connects to the 4x1 splitter.

Fan hub connects to CPU_Opt or a SYS_Fan header.
RGB splitter connects to the RGB header on the motherboard (if applicable)

 

[hannya8716]

Manual here:
http://www.deepcool.com/product/LiquidCooler/2018-08/209_9434.shtml

Pump goes directly to the motherboard (CPU_Fan or PUMP_Header) depending on the motherboard. RGB from the pump runs to the 4x1 splitter.
Fans connect to the fan hub, and the RGB output from the fans connects to the 4x1 splitter.

Fan hub connects to CPU_Opt or a SYS_Fan header.
RGB splitter connects to the RGB header on the motherboard (if applicable)

Thanks for the clarification. actually I was reading the manual but got confused.

 

[hannya8716]

Manual here:
http://www.deepcool.com/product/LiquidCooler/2018-08/209_9434.shtml

Pump goes directly to the motherboard (CPU_Fan or PUMP_Header) depending on the motherboard. RGB from the pump runs to the 4x1 splitter.
Fans connect to the fan hub, and the RGB output from the fans connects to the 4x1 splitter.

Fan hub connects to CPU_Opt or a SYS_Fan header.
RGB splitter connects to the RGB header on the motherboard (if applicable)

just a follow question. due to how the cables where previously managed on my PC, the easiest option will be to connect the Fan Hub to Chassis Fan. Is it advisable or no?