This issue has been around since 20 days ago and I can't finish my work since this thing keeps freezing and showing artifacts.
Should i change the cpu or something?
Should i change the cpu or something?
nothing, there nothing i replaced the ram alreadyyour iGPU uses motherboard/system memory.
Run memtest on your memory to check for errors.
and it still does not fix itnothing, there nothing i replaced the ram already
I5 3470Are you overclocking your RAM?
If XMP is enabled, disable it to reduce the memory clock speed.
Are both sets of RAM you've tested listed in the motherboard QVL?
Are you running four DIMMs or two?
If you have two DIMMs in a mobo with four memory slots, are the DIMMs installed in the slots recommended in the mobo manual?
A full list of all system components would be useful.
Install a discrete graphics card.and it still does not fix it
Still crashes but no artifactsInstall a discrete graphics card.
Get cheapest you can get with enough performance required by your workload.
I don't know, what software you use for your work.
GT1030 perhaps?
Tried to repaste but the stock cooler broke down one of their white plastic 😭😭😭😭😭try to reapply thermal paste, maybe its just overheating
What software do you use?Still crashes but no artifacts
Then you'll need to get a new cpu cooler also.Tried to repaste but the stock cooler broke down one of their white plastic 😭😭😭😭😭
no like noWhat software do you use?
Does it use iGPU resources? like quicksync for example?
iGPU should be disabled, when discrete graphics card is installed.
well this will took long since i live in vietnamThen you'll need to get a new cpu cooler also.
Preferably better one than the original.
Deepcool GAMMAXX 400 , Cooler Master Hyper 212 evo or similar.