Question Intel® Core™ i5-9600K CPU @ 3.70GHz help???

Jan 13, 2020
19
1
15
0
I'm waiting for tax return to get my graphic card but to past the time I'm just chilling my CPUs integrated graphics witch is
Intel® UHD Graphics 630. Im curntly trying to play apex and I'm getting around 20 to 26 FPS while I watch benchmark videos that get 30 to 40 I don't care if there's no fix to this issue cause ill just wait for taxes, but if there is a way to get better performance with something like drivers then id like to know please.
 
Jan 13, 2020
19
1
15
0
Since IGPUs run depend more on RAM and motherboard, check that the frequency of ram, and the motherboard model is same or similar. Also make sure drivers are up to date and all that.
my ram runs at 3200MHz out of the box no overclocking done and as for the drivers i can't seem to find them on the site I was hoping someone else could help me with that
Support for DDR4 4266(O.C.) / 4133(O.C.) / 4000(O.C.) / 3866(O.C.) / 3800(O.C.) / 3733(O.C.) / 3666(O.C.) / 3600(O.C.) / 3466(O.C.) / 3400(O.C.) / 3333(O.C.) / 3300(O.C.) / 3200(O.C.) / 3000(O.C.) / 2800(O.C.) / 2666 / 2400 / 2133 MHz memory module
 
Jan 13, 2020
19
1
15
0
my ram runs at 3200MHz out of the box no overclocking done and as for the drivers i can't seem to find them on the site I was hoping someone else could help me with that
Support for DDR4 4266(O.C.) / 4133(O.C.) / 4000(O.C.) / 3866(O.C.) / 3800(O.C.) / 3733(O.C.) / 3666(O.C.) / 3600(O.C.) / 3466(O.C.) / 3400(O.C.) / 3333(O.C.) / 3300(O.C.) / 3200(O.C.) / 3000(O.C.) / 2800(O.C.) / 2666 / 2400 / 2133 MHz memory module
the cpu is 8th gen if that helps
 

extreme_noob

Respectable
my ram runs at 3200MHz out of the box no overclocking done and as for the drivers i can't seem to find them on the site I was hoping someone else could help me with that
Support for DDR4 4266(O.C.) / 4133(O.C.) / 4000(O.C.) / 3866(O.C.) / 3800(O.C.) / 3733(O.C.) / 3666(O.C.) / 3600(O.C.) / 3466(O.C.) / 3400(O.C.) / 3333(O.C.) / 3300(O.C.) / 3200(O.C.) / 3000(O.C.) / 2800(O.C.) / 2666 / 2400 / 2133 MHz memory module
And do you know the frequency of the ram used in testing? Cooling solution could also be a factor, along with background apps.
 
The cpu is 9th gen. 8th gen would've been the 8xxx series.

Did you enable xmp for the ram? If not, its not running 3200 out of the box. It would be default speeds, which is 2133. 3200 is the rated speed. You still have to enable it.

Also what configuration is it? 1 stick or 2? A single stick will run slower.

You on the same resolution as the vids? If your 1080 and they're on 720, that could explain the difference.
 
Jan 13, 2020
19
1
15
0
The cpu is 9th gen. 8th gen would've been the 8xxx series.

Did you enable xmp for the ram? If not, its not running 3200 out of the box. It would be default speeds, which is 2133. 3200 is the rated speed. You still have to enable it.

Also what configuration is it? 1 stick or 2? A single stick will run slower.

You on the same resolution as the vids? If your 1080 and they're on 720, that could explain the difference.
no xmp is not in abled i dont belive so any way and it's a 2x8 kit https://www.corsair.com/us/en/Categories/Products/Memory/Vengeance-PRO-RGB-Black/p/CMW16GX4M2C3200C16
 

extreme_noob

Respectable
well if your talking about my CPUs cooling it chills around 50 to 45 degrees but cpu-z says the NB Frequency id 4100.0MHz but the DRAM is 1066.7MHz
1066Mhz = 2133 when you take into account double data rate

Your ram is not running XMP on. It is running 2133Mhz stock. Go into bios and enable XMP profile. This (read: leaving ram at 2133mhz) can severely hinder performance since IGPU uses your ram instead of dedicated VRAM.
 
Reactions: Gmoney06ss
Jan 13, 2020
19
1
15
0
1066Mhz = 2133 when you take into account double data rate

Your ram is not running XMP on. It is running 2133Mhz stock. Go into bios and enable XMP profile. This (read: leaving ram at 2133mhz) can severely hinder performance since IGPU uses your ram instead of dedicated VRAM.
ok sweet, I did that and now im running at what I suspected but do you know if there is any way to check if my drivers are up to date?
 
Feb 19, 2020
55
7
35
1
Yep, If it's a prebuilt, go to the site and enter your tag or find your gear. If it's home built, you should know where to get the drivers for each part ;) You guessed it, the manufacturer.
 

ASK THE COMMUNITY

TRENDING THREADS