Intel DG965WH & Corsair CM2X512A-6400

[s18000rpm]

Hello everyone, i'm from India, & i've bought this Intel DG956WH Motherboard & 1GB Corsair RAM (DDR2 Twin2X1024A-6400 800MHz / CM2X512A-6400) from USA.(thru a frnd)

but after some re-searching in Intel's site, i came to know that 965WH mobo supports upto 1.8Volts, & this 512x2 Sticks are @ 1.9Volts.

So can you guys please help me in resolving this issue.

source:TomsHardware

please guys, i'm a noob when it comes to BIOS & tweaking stuffs. please provide me HELP with step by step procedure.

i cannot return this RAM sticks, coz it'll take another 2-3months.

if you guys need any further info on this(RAM model...), please tell me

 

[XMSYellowbeard]

Have you installed the memory and tried to boot and run the system? It may all work just fine. The only way to know for sure is to test it.

 

[s18000rpm]

hi guys, 2day only i cud try my new mobo & RAM, guess what i could boot into BIOS

this is "Advanced Setting" page in BIOS.




i was able to change the freq. (533,667,800)
pls guys explain the other things in that screen

1st time i missed the BIOS(forgot to pres F1), it showed this error. is it normal as i did not connect anything, except Procy, RAM?

error
The Firmware has detected that a CMOS Checksum Error has Occured