Intel DZ68BC won't boot

Dennyferra

Distinguished
Dec 25, 2011
3
0
18,510
Just got a new DZ68BC mobo and I'm having trouble booting. Power to the mobo seems good since I get the green power LED on the board. When I try to power it with the onboard button the PME LED light flashes as well as the power button. No fans turn on and no beeps. Removed all components but the CPU and still same issue. Any ideas?
 
I would bet on the cpu power connector not being plugged in. If you are still having problems after checking all of these plug ins you can give our technical support a call at 916-377-7000 and they should be able to help trouble shoot and if needed set up an RMA on the board.

Christian Wood
Intel Enthusiast Team
 

Dennyferra

Distinguished
Dec 25, 2011
3
0
18,510
Thank you guys! Turns out my PSU was acting up, funny since it ran my previous setup. I had another PSU plugged in and it booted up right away. One of my Memory modules seems bad though since I had a 2E error with both plugged in. Took one out and everything is fine now. Thanks again.