Intel G620 + GA-H61M-S1 HWMonitor error


Sep 20, 2010
Hey guys,
I have an error reading on hardware monitor with GA-G61H-S1 with Intel Pentium G620.
Anysolution to fix this problem?

My spec:

-Intel Pentium Dual Core G620 @ 2.60Ghz
-Gigabyte GA-H61M-S1 Rev2.0 (Bios F5)
-Corsair CMXG2GM1A1333C9 (slot 1)
-Transcend JM333KLN-2G (slot 2)
-Gigabyte GV-N220OC-1Gi 770/1674/900
-Gigabyte PoweRock GE-N390N-C2
-Intel Stock Cooler

Thanks.. :(


Sep 20, 2010
:cry: Thant non oc for cpu at all..I use default bios setting.

HWMonitor version


Mainboard Model H61M-S1 (0x000001AD - 0x00507491)


LPCIO Vendor ID 0x90
LPCIO Chip ID 0x8728
LPCIO Revision ID 0x1
Config Mode I/O address 0x2E
Config Mode LDN 0x4

Hardware Monitors

Hardware monitor ITE IT87
Voltage 0 1.42 Volts [0x59] (CPU VCORE)
Voltage 1 2.98 Volts [0xBA] (VIN1)
Voltage 2 3.92 Volts [0xF5] (+3.3V)
Voltage 3 6.72 Volts [0xFA] (+5V)
Voltage 4 11.90 Volts [0xBA] (+12V)
Voltage 5 -4.86 Volts [0x4C] (-12V)
Voltage 6 -8.06 Volts [0x7E] (-5V)
Voltage 7 3.79 Volts [0x8D] (+5V VCCH)
Voltage 8 2.10 Volts [0x83] (VBAT)
Temperature 0 38°C (100°F) [0x26] (TMPIN0)
Temperature 1 127°C (260°F) [0x7F] (TMPIN1)
Temperature 2 30°C (86°F) [0x1E] (TMPIN2)
Fan 0 5844 RPM [0xE7] (FANIN0)
Fan PWM 0 0 pc [0x0] (FANPWM0)
Fan PWM 1 0 pc [0x0] (FANPWM1)
Fan PWM 2 0 pc [0x0] (FANPWM2)

Hardware monitor ACPI
Temperature 0 28°C (82°F) [0xBC2] (TZ00)
Temperature 1 30°C (85°F) [0xBD6] (TZ01)

Hardware monitor Intel Sandy Bridge
Temperature 0 37°C (98°F) [0x41] (Core #0)
Temperature 1 41°C (105°F) [0x3D] (Core #1)

Hardware monitor NVIDIA GeForce GT 220
Temperature 0 36°C (96°F) (GPU Core)

Hardware monitor SAMSUNG HD503HI
Temperature 0 37°C (98°F) [0x25] (Assembly)

Hardware monitor WDC WD5000AAKX-001CA0
Temperature 0 42°C (107°F) [0x2A] (Assembly)

Processor 1 ID = 0
Number of cores 2 (max 8)
Number of threads 2 (max 16)
Name Intel Sandy Bridge
Specification Intel(R) Pentium(R) CPU G620 @ 2.60GHz
Package (platform ID) (0x1)
Extended CPUID 6.2A
Core Stepping
Technology 32 nm
Core Speed 2594.1 MHz
Multiplier x FSB 26.00 x 99.8 MHz
Stock frequency 2600 MHz
Instructions sets MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, EM64T, VT-x
L1 Data cache 2 x 32 KBytes, 8-way set associative, 64-byte line size
L1 Instruction cache 2 x 32 KBytes, 8-way set associative, 64-byte line size
L2 cache 2 x 256 KBytes, 8-way set associative, 64-byte line size
L3 cache 3 MBytes, 12-way set associative, 64-byte line size
FID/VID Control yes

Turbo Mode not supported
Max non-turbo ratio 26x
Max turbo ratio 26x
Max efficiency ratio 16x


I use the psu that i use on my older CPU E5300@3.66Ghz without any error HWM reading for about 2 years...But when i use sandy bridge with this mobo...All reading look strange ... :ouch:

Anysoftware to correct this problem?