intel pentium g4560

[abhi471990]

So i even feal silly about this question

But i just bought g4560 with gigabyte h110m-h mobo.

While playing 10minutes of csgo and gtav i was getting over 150fps and 45fps respectively with cpu load almost 90%-100% and temperature rose to 60c-61c. As a former amd user i know these temps are high for amd but is it normal for this intel processor. Or is this temps are going high because when i bouht this cpu my mobo bios were update that vender used a 6th gen i3 and put my g4560 cpu cooler on it. So because of that thermal paste spread over i3 when he was about to put that intel cpu cooler back g4560 i asked him to apply little paste again before placing it on g4560.

So is this temp normal or hight for g4560.

 

[why_wolf]

That's a good temp. The CPU is rated up to 100c, though it probably starts to throttle at around 80c.

 

[DRagor]

As for thermal paste, you should make fresh application (and completely clean old one) whenever you put cooler on CPU. Just adding 'a bit more' to already used layer is not a good practice. However, if you got 60C max at 100% use, it is more or less okay (if using box cooler). Perhaps if you had better airflow in case, temps would go down few degrees.

 

[prashant393]

Don't worry that is a normal temp for a cpu and if you are still concerned about the temperature then get a case with better airflow or get an aftermarket cpu cooler. If you are getting a new cooler then go for coolermaster