Intel S1200BTLR in wrong Antec Case

PGMTech

Honorable
Apr 2, 2013
5
0
10,510
0
I put an Intel S1200BTLR MB into an Antec Atlas 550 chassis. Unfortunately, this particular Antec case does not have the modular front panel connector assembly to fit into the Intel MB's front panel connector header group as described in this link:

http://www.intel.com/support/motherboards/server/sb/CS-028813.htm

Anybody know of an adapter cable I can get that I can plug into the MB and connect to the chassis' loose front panel leads?

Thanks.
Michael
 
Welcome to Tom's Hardware Forums,
According to the pictures I'm looking at, your front connectors should work - the Front Panel SSI Standard 24-pin Connector Pin-out is located just below the white PCI slot between two USB headers and your connectors should fit there as shown in the pinout diagram. They are not modular but individual and need to be placed in as such
Hope it helps
 

PGMTech

Honorable
Apr 2, 2013
5
0
10,510
0
Yes, I could plug the existing leads into the modular group if the leads were long enough. However, this header group is located too far to the back for the current front panel leads to reach. Guess I'm going to have to cut each lead and attach wires to make them longer. Was wondering if there was just a cable that fit into the slot with labeled leads coming out.
thanks
 

Similar threads


TRENDING THREADS