Hello everyone I need your help.
Here's the situation. An old server quite on us. I was able to get a replacement motherboard and moved over all the components. The pc powered on and sounded like began to post and spit out a 3 beep post code indicating bad ram. I turned off the pc and tried again to boot and make sure the code i got was correct and nothing. Just like the original board no power on. Power led is on, I tested the original power supply and just in cast replaced it with a known working one and nothing. Wont power on to. Tried clearing the cmos with the jumper pins, purchased new ram, nothing. Moved ram around into different slots and still nothing. Any help with be greatly appreciated.
Intel server se7320ep2 I replaced ram with the exact same brand and capacity. No bent pins anywhere. Even replaced cmos battery.
Here's the situation. An old server quite on us. I was able to get a replacement motherboard and moved over all the components. The pc powered on and sounded like began to post and spit out a 3 beep post code indicating bad ram. I turned off the pc and tried again to boot and make sure the code i got was correct and nothing. Just like the original board no power on. Power led is on, I tested the original power supply and just in cast replaced it with a known working one and nothing. Wont power on to. Tried clearing the cmos with the jumper pins, purchased new ram, nothing. Moved ram around into different slots and still nothing. Any help with be greatly appreciated.
Intel server se7320ep2 I replaced ram with the exact same brand and capacity. No bent pins anywhere. Even replaced cmos battery.