Hello everyone,
To give you all a bit of backstory, my RGB lights on my ASUS ROG Z370-F mobo randomly turnt off two days ago after having worked fine for nearly a year. I tried many different fixes which ended up with me messing around with my motherboard and eventually reconnecting the LED connector to the motherboard (which still didnt fix the issue). I damaged my motherboard a bit while doing all this, a pin and the grey shielding from the USB 3.1 header were both removed. After all this I just decided to move on and forget about it, but while I was attempting to fix the lights I reset my bios. Now I set all the settings back to the way there were but for some reason my CPU still runs at 1.32v when utilization is in or around 5%. It was never like this. My settings are:
- All Cores 50
- Adaptive Voltage @ 1.3v + 0.015v Offset
- Speedstep Enabled
- Speedshift Enabled
- C- States Enabled
- LLC level 5
- IA DC/AC @ 0.01
- Auto CPU power management
- Max Power Saving balance plan in windows
http://prntscr.com/lbzr4e
As you can see from the picture only one or two cores go to 800mhz then suddenly back to 5Ghz
Any help is appreciated, thanks in advance.
To give you all a bit of backstory, my RGB lights on my ASUS ROG Z370-F mobo randomly turnt off two days ago after having worked fine for nearly a year. I tried many different fixes which ended up with me messing around with my motherboard and eventually reconnecting the LED connector to the motherboard (which still didnt fix the issue). I damaged my motherboard a bit while doing all this, a pin and the grey shielding from the USB 3.1 header were both removed. After all this I just decided to move on and forget about it, but while I was attempting to fix the lights I reset my bios. Now I set all the settings back to the way there were but for some reason my CPU still runs at 1.32v when utilization is in or around 5%. It was never like this. My settings are:
- All Cores 50
- Adaptive Voltage @ 1.3v + 0.015v Offset
- Speedstep Enabled
- Speedshift Enabled
- C- States Enabled
- LLC level 5
- IA DC/AC @ 0.01
- Auto CPU power management
- Max Power Saving balance plan in windows
http://prntscr.com/lbzr4e
As you can see from the picture only one or two cores go to 800mhz then suddenly back to 5Ghz
Any help is appreciated, thanks in advance.
Facebook
Twitter
Instagram