inventec b800g2 motherboard specs

[shadowqueenvideogameservices]

any idea what the front power/reset button header config is? Preparatory or universal???

This is what the seller SAYS the mobo is:
Inventec B800G2/10G A9Drpf-10G Dual Lga2011 Eatx Zt System Board
Manufacturer: Inventec
Part Number: B800G2/10G

Model: A9DRPF-10G
Type of Socket: LGA2011
Number of Socket: 2
Form Factor: EATX
Compatibility: ZT systems Server


I tried to look online but found other boards other then what is pictured in ther listing which is this

but are we even talking aout the same board as the one in the picture????? If not what the heck model is in the picture???


if so can anyone give me a cpu list max ram quantity ddr3 or ddr2 or ddr4 and front panell power and reset button header diagram and whether or not the header and powersupply are preparatory??????


I don't want to shell out 200 some bucks for these if they arent compatible or arent as listed???

Thanks.

 

[The Paladin]

well the board your showing is Inventec B800G2/10G A9Drpf-10G Dual Lga2011 Eatx Zt System Board
Manufacturer: Inventec
Model: A9DRPF-10G
Type of Socket: LGA2011
Number of Socket: 2
Form Factor: EATX
Part number is Part Number: B800GG0 not B800G2


really odd because seem the b800GG0 and B800G2 are intermixed between Inventex and ZT Systems as shown below.,
CHENBRO ZT SYSTEMS Z1100SH SFF 8 BAY 1U SERVER B800G2/10G 2x E5-2630L 8GB
and their support pages is really corporate aimed.
http://dtsupport.ztsystems.com/Default.aspx?tabid=803

I know this doesn't help you, I could get nothing from either names, motherboard or anything useful to you.
are they good board, sure for a server I guess they are , but I see not support except a few places that sells them on the web.

its a gamble, no doubt

 

[shadowqueenvideogameservices]

well the board your showing is Inventec B800G2/10G A9Drpf-10G Dual Lga2011 Eatx Zt System Board
Manufacturer: Inventec
Model: A9DRPF-10G
Type of Socket: LGA2011
Number of Socket: 2
Form Factor: EATX
Part number is Part Number: B800GG0 not B800G2

 

[shadowqueenvideogameservices]

Good to know!

About my three questions
Is the psu preparatory
Is the front panel power reset headers preparatory
Ddr3 ecc Ram? How much max?

 

[chriscambridge]

[strike]I am about to buy this board[/strike], so I thought I would share what I know generically about dual V1 Xeon motherboards.

Most if not all dual Xeon motherboards require ECC ram; type of RAM and the speed is dictated by the processor. In the case of V1 Xeons it is DDR3. If you check at ark.intel.com for the CPU it will tell you the speed.

Most dual V1 Xeon motherboards, such as this one, require a normal ATX PSU but one that has 2x8pin EPS connectors, plus the normal 24pn.

I am not sure what you mean by "Is the front panel power reset headers preparatory".

--

[strike]Personally what I want to now is will it run on Windows 10 pro?[/strike]

I just found this:

There's not much info on the internet about the board in this build. Natex lists it as a Foxconn t2491601. Currently board only supports E5 v1 cpus due to bios limitations. No known v2 compatible bios is known to publicly exist. The bios lists it as a: ZTSYSTEM A9DRPF-10D, which is the same as an Inventec B800G2/10G. Manual is here.

Heads up as well. This board won't run Windows bare metal. It gets an ACPI Bios BSOD went attempting to boot. Boots and runs VMWare ESXI, FreeNas, Ubuntu, Centos, and Unraid just fine. I'm using Unraid.

ServeTheHome discussion lists them as retired custom servers from a large company. From the name in the IPMI web management, it appears to be a retired Amazon server.

This is the manual for this motherboard: https://www.dropbox.com/s/i9oft165mh3bgis/B800BoardManual.pdf

So because it cannot run Windows, I will not be buying this!